WSP Whole House Water Filter - Whole-Home Drinking Combo

Wondering what those water test numbers really mean for your daily life? When your water tastes off, smells strange, or leaves gritty particles, it often points to chlorine, chloramine, or general impurities affecting every tap. The WSP Whole House Water Filter - Whole-Home Drinking Combo helps reduce these issues for cleaner water throughout your home.

What makes water taste, smell, or look unpleasant around the house?

You might notice a sharp chemical taste in your drinking water, a strong odor when running taps, or fine particles settling in sinks and glassware. These symptoms often come from disinfectants like chlorine or chloramine used in municipal water treatment, as well as organic compounds and tiny sediment. The presence of these elements can make coffee taste metallic, cause a film on shower doors, and dull your dishes after washing.

How the control head manages water treatment for you

This system uses a metered control head that tracks your actual water use. It knows when to start its cleaning routines, like automatic backwash cycles, which lift and rinse the filter bed to keep it effective without wasting water or salt. This genuine metered softening valve helps the system run efficiently, saving you from unnecessary maintenance and expenses.

What’s inside the tank and why it works for your water

Inside the tank sits a blend of media designed for your water’s challenges. Catalytic activated carbon helps reduce chlorine, chloramine, and odors that affect taste. The high-capacity cation exchange resin targets hardness caused by calcium and magnesium, which can form scale inside pipes and appliances. The 10% cross-linked cation resin is built to last longer, especially when chlorine is present, so the system stays effective over time.

The tank size and treatment capacity explained

The system comes with tanks ranging in size from about 9 to 12 inches in diameter and between 48 and 54 inches tall, holding between 1 and 2 cubic feet of media. This translates to a softening capacity of roughly 32,000 to 64,000 grains, meaning it can handle continuous water treatment at your home without frequent regeneration cycles, maintaining consistent quality at every tap.

Is this system the right fit for your home size?

This combo system is designed for average family homes with 2 to 4 people and up to 2 bathrooms. If you live in a larger household with 5 to 7 people and 3 to 4 bathrooms, the largest tank option offered here should suit your needs. For homes smaller than this or with fewer bathrooms, a smaller system might be more economical. Confirming this against your actual water use and quality test results will help ensure you get the right size.

What you get when you order

Included in the package is a lifetime warranty on the pressure vessel tank, assuring you of its durability. The control valve and electronics come with the manufacturer's warranty according to their terms. A bypass valve is included at no extra cost, which lets you isolate the system while still keeping water running to your home during maintenance. Also provided is 10 feet of discharge hose for the drain line, so you have what you need to get started right away.

What happens next

Water Softener Plus (WSP) ships this system from Tampa with free U.S. shipping already included. Installation is done by your local licensed plumber, so you can expect professional setup based on your home's specific needs. You can order this system online now to take the first step toward improving your home's water quality at every tap.

Who this size is right for

This is rated for roughly 8 gallons per minute of service flow, which suits an average family home - around 3-4 people with 2-3 bathrooms.

Flow rate matters more than tank size here: add up the fixtures that could realistically run at the same time and make sure this covers them. If you land close to the limit, go up rather than down.