WSP Whole House Iron & Sulfur Filter - All-In-One, Catalytic MnO2, 10x54"

The WSP Whole House Iron & Sulfur Filter is designed to tackle stubborn orange-brown stains from iron and the rotten-egg smell that sulfur can cause in your water. With a catalytic manganese-dioxide media and an automatic air injection system, this 10" x 54" filter treats your entire home’s water supply, making it clearer and fresher without the need for chemicals.

When Water Heater Trouble Is More Than Just Age

Picture this: your water heater starts leaking after just a few years, the tank rimmed with rusty orange stains and your sinks and tubs showing that same faded discoloration. You’ve scrubbed the shower door again and again to clear a stubborn film, and your towels feel rough despite fresh washes. The culprit is iron and sulfur in your water, quietly building up inside appliances and around your home. This isn’t wear and tear from everyday use — it’s mineral buildup and sulfur compounds causing problems that get worse over time.

How the Control Head Keeps Your System Running Smoothly

On top of the filter sits the automatic control head with an air injection feature that pulls in a small air pocket. This air pocket naturally oxidizes iron and sulfur compounds as water passes through, turning them into solid particles the filter media can capture. Periodically, the system runs a backwash cycle that lifts and rinses the media bed, flushing away the trapped particles. A 3/4" bypass valve comes included so you can isolate the filter during maintenance without shutting off water to your whole house. This control head manages these tasks automatically, saving you time and avoiding guesswork.

The Media That Targets Iron, Manganese, and Sulfur

Inside the 10" x 54" tank is a specially designed catalytic manganese-dioxide media. It’s chosen because it helps reduce iron, manganese, hydrogen sulfide, and other sulfur compounds by trapping them after the oxidation process. This media works well for these minerals because it’s highly active and long-lasting, holding onto the oxidized particles until the backwash cycle flushes them out. It’s a system that doesn’t rely on chemicals but instead uses natural reactions to treat your water effectively.

A Tank Sized to Handle Daily Household Water Needs

The filter’s tank measures 10 inches by 54 inches, providing enough media volume to treat water at a steady flow of about six gallons per minute. This size means it can keep up with the water demands of a small home—typically one or two people using one or two bathrooms—without frequent backwashing or drop in water pressure. The tank is also covered by a lifetime warranty, so the pressure vessel is protected for the life of your home.

Who Will Find This Filter a Good Match

This system suits smaller households where iron and sulfur are present but not at very high levels. If you have one or two people in your home and one or two bathrooms, this is a practical size to keep your water clear without overspending on a larger unit. Larger households or those with heavier mineral loads should look at bigger systems designed for higher flow and capacity.

What Comes with Your Purchase and How to Proceed

Your order includes the catalytic manganese-dioxide media tank, the 2510SXT air injection control valve, a 3/4" bypass valve so you can service the filter without cutting off your water, and 10 feet of discharge hose for the drain line. The pressure tank itself carries a lifetime warranty for peace of mind. U.S. shipping is free and already included in the price. When you’re ready to improve your water quality and protect your appliances, you can order this system online for prompt shipment from Tampa, Florida.

Who this size is right for

This is rated for roughly 6 gallons per minute of service flow, which suits a small home - around 1-2 people with 1-2 bathrooms.

Work out what runs together on a bad morning and size for that figure. Equipment starved of flow does not just run slowly, it stops treating properly.