30cc per day chemical feeder pump — Res-Up Feeder, 30cc Day

Res-Up Feeder, 30 cc/Day is a chemical metering feeder pump that injects Res-Up or similar liquid treatment into a water system at a set 30 cc-per-day rate. The higher output makes it suited to larger systems or heavier dosing schedules than lower-rate feeders.

• Nominal dosing output of 30 cc per day
• Liquid chemical feeder pump for continuous injection
• Works with Res-Up resin cleaner and comparable products
• Shipping weight approximately 9 lb
• Provides steady, higher-volume metered delivery

This feeder is typically paired with softeners and filtration equipment that benefit from ongoing dosing of resin cleaners or sequestering agents to counter fouling from iron, hardness, or other contaminants. Its 30 cc/day rate delivers roughly two and a half times the output of a 12 cc/day unit, making it a fit where a stronger maintenance dose is called for. Verify chemical compatibility and calculate your required dose before setup, and position the unit so the solution tank and injection fitting remain accessible for refills and service.

Res-Up Chemical Feeder

The Res-Up Feeder is a small metering pump designed to inject a measured dose of treatment solution into your water, set here to deliver up to 30cc per day. It is most often paired with Res-Up resin cleaner to keep softener resin free of iron and fouling, but this style of feeder can dose other liquid treatment chemicals in a controlled, repeatable way rather than relying on manual pouring.

When a Feeder Helps

Softeners running on well water with iron are prone to resin fouling, which gradually cuts capacity and lets hardness slip through. A steady micro-dose of resin cleaner keeps the resin bed clean between regenerations and helps it perform closer to new. If you have noticed hardness creeping back, brown staining returning, or a softener that regenerates but no longer keeps up, adding a feeder is a proactive way to protect the resin investment.

How It Fits and Operates

The feeder draws from a reservoir of solution and injects into the water line or brine path on a timed basis, delivering a small, consistent daily amount. Because it works continuously and quietly in the background, it is a low-effort way to extend resin life. Because it delivers a small, steady amount rather than a large slug of chemical, it treats the resin gently and consistently, which is exactly what a fouled bed needs. Water Softener Plus includes the manual with your feeder and can help you confirm the right chemical, dosing point, and setup for your system so the feeder does its job without over- or under-dosing, and your softener keeps making soft water year after year.