Description
The Rusco NT200-100 combines big flow with fine filtration, pairing a 2-inch body rated for up to 100 GPM with a 100-mesh screen. That makes it ideal for large homes, agricultural operations, and light commercial systems that need to remove fine sediment without sacrificing volume. Where a coarser screen would let smaller particles slip through, this 100-mesh element catches finer sand and silt while the wide 2-inch ports keep pressure loss low, giving you the best of both worlds for high-demand properties. Few separators offer this much capacity paired with such fine particulate capture in a single, easy-to-service unit.
Spin-down separators like the NT200-100 use centrifugal force to do the work. As water enters, it spins around the chamber, driving heavier particulates outward where they fall into the clear collection sump. A quick turn of the flush valve sends accumulated debris down the drain, no cartridge to buy, clean, or replace. Because the housing is transparent, you can watch sediment collect and time your flushes precisely, avoiding both unnecessary maintenance and neglected buildup that could otherwise restrict flow or allow particles to carry over downstream.
Specifications and Use
- 2-inch inlet/outlet supports flows up to 100 GPM
- Fine 100-mesh screen for thorough sediment capture
- Transparent housing shows exactly when to flush
- Manual purge valve for fast, tool-free cleaning
- Reusable element saves money over disposable cartridges
- Excellent pre-treatment for softeners, UV, and reverse osmosis
Installed at the point of entry, the Rusco NT200-100 protects high-capacity treatment equipment, pumps, and fixtures from the abrasive particles that cause clogging and premature wear. Mount it vertically with clearance below the sump, and pair it with a coarser separator upstream if your source water carries a very heavy sediment load. Its blend of fine filtration and high throughput makes it a versatile workhorse for properties that demand both clean water and uncompromised flow, and it works especially well as the first stage ahead of membrane systems that are sensitive to fine grit. On agricultural and irrigation lines, the same fine screen keeps drip emitters and micro-sprinklers from clogging, while the high flow rating ensures large zones still get the volume they need. Few sediment filters cover this much ground in a single, low-maintenance package.
Overview
- ? U.S.-based support and expert assistance
- ?? Built with trusted Pentair & Fleck components
- ?? Ships nationwide - freight-safe packaging
- ?? Ideal for residential and light-commercial systems
Specs (Typical)
| Max Operating Pressure | 125 psi |
|---|---|
| Max Water Temp | 100 ?F |
| Electrical | 120 V AC |
| Flow Range | 5-45 GPM (model dependent) |
Related: Control Valves . Parts . Get sizing help

