How the Fleck Well Rust + Hardness System Removes Rust and Hardness
Water drawn from wells in Renville County tapping the 112TILL aquifer commonly exhibits iron concentrations that may cause rust-colored discoloration, staining, and hardness issues. According to groundwater sampling by the U.S. Geological Survey, iron was detected in all tested wells with a median concentration around 1320 micrograms per liter, ranging from 151 to 1840 micrograms per liter. These iron levels are below all federal thresholds, indicating no health-based violation, but they can contribute to rust-related aesthetic and operational concerns.
The Fleck Well Rust + Hardness System is designed with a 32,000 grain capacity to address both iron and hardness effectively. It utilizes a combination of filtration and ion exchange processes to remove or neutralize dissolved iron particles and reduce hardness minerals that cause scale and spotting. This treatment results in clearer, softer water suitable for household use.
Differences at the Tap After Treatment with the Fleck System
Once water passes through the Fleck System, users will notice a reduction in reddish staining on fixtures and laundry, as well as less scale buildup on faucets and appliances. Softened water feels smoother and can improve soap lathering and cleaning efficiency. These changes occur without altering water safety, as the system targets aesthetic and operational effects rather than health parameters.
What Public-System Records Show Versus Private Well Testing
The USGS sampling reflects multiple wells within Renville County’s 112TILL aquifer but does not reveal the specific conditions of any single household well. Public data indicate typical iron concentration ranges in the area, which can guide expectations but cannot substitute for individual testing. Only a certified laboratory analysis of your own water can determine exact iron and hardness levels necessary for proper treatment sizing and system configuration.
Consequences of Leaving Rust and Hardness Untreated Over Time
Without treatment, mineral deposits build up gradually, causing clogging in pipes, stains on plumbing fixtures, and decreased efficiency of water heaters and appliances. Iron compounds settle as reddish-brown residues that can be difficult to remove and may lead to increased maintenance needs. Hardness contributes to scale formation that shortens equipment lifespan and raises energy consumption.
Fixtures and Appliances Most Affected by Rust and Hardness
Toilets and sinks often show early staining from rust. Water heaters experience scale buildup that impairs heating elements, reducing performance. Dishwashers and laundry machines may accumulate deposits causing spotting on glassware and fabric stiffness. Faucets and showerheads can clog with mineral scale, reducing flow.
Understanding Certified Laboratory Testing for Iron and Hardness
A certified lab test for iron reports concentrations typically in micrograms per liter (ug/L) or parts per billion (ppb), identifying dissolved and particulate forms. Hardness is measured in grains per gallon (gpg) or milligrams per liter (mg/L) as calcium carbonate. Interpreting these results helps determine the necessary treatment capacity and configuration. Regional data like the USGS’s provide useful benchmarks but are no substitute for testing your own water to align treatment precisely with your household’s conditions.
In summary, regional sampling from Renville County’s 112TILL aquifer underscores the normal presence of iron and hardness that can cause rust and buildup in household water. Selecting and sizing a treatment system like the Fleck Well Rust + Hardness System depends on understanding these area data points alongside certified lab tests of your own water. This combined approach supports an effective response that improves water quality and protects household plumbing and appliances.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-10-24. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112TILL aquifer (Renville County): 5 results from 5 wells, median 1320.0 ug/L, range 151.0-1840.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.