Autotrol Arsenic Filter

Buy Now

View full details

If You Notice Continued Arsenic Concerns Despite Treatment, Understand How Area Data Informs Your Situation

The U.S. Geological Survey sampled groundwater from four wells in Roane County’s aquifer 317DKRD. Each well was between 71 and 460 feet deep. Their arsenic measurements ranged from 0.37 to 26.4 micrograms per liter (µg/L), with a median concentration of 12.75 µg/L. These are area-wide samples, reflecting what occurs in this aquifer, not specific levels in your well or tap water. A private well test is needed to determine your home's precise condition.

If You Confuse Arsenic with Other Common Water Issues Like Taste or Staining, Here’s How to Differentiate

Arsenic is a naturally occurring element in groundwater that can be detected by laboratory instruments. Unlike substances that affect water's taste, odor, or color, arsenic does not produce easily noticeable changes in the water's appearance or smell. This distinguishes arsenic contamination from issues such as iron or sulfur, which often cause distinct drinking water traits. Testing is essential because sensory clues often do not reveal arsenic presence.

If Your Well is Near the Sampled Depth Range, Consider How These Depths Relate to Arsenic Levels

The wells sampled ranged widely in depth. Arsenic concentrations can vary with depth due to geologic conditions. Therefore, if your well is substantially shallower or deeper than those sampled, arsenic levels could differ from those reported in the area data. Testing your own water will reveal your specific profile. The report’s values guide expectations but do not define your water’s actual arsenic content.

If You Want to Understand What the Range Indicates Compared to Federal Standards, Here’s What It Does and Does Not Show

None of the four samples from Roane County’s aquifer 317DKRD exceeded the federal arsenic threshold in the 2018 sampling. This means the area's documented concentrations do not violate the federal safety limit for arsenic in drinking water. However, detection does not equal a health risk by itself. The range and median only describe arsenic presence in the sampled wells—they do not establish safety or risk for your individual water supply.

If You’re Deciding How to Confirm Your Water’s Arsenic Level, Start with Simple Checks Before Laboratory Testing

Because arsenic is colorless and odorless, sensory checks won't detect it. The first step is to obtain a water test focused explicitly on arsenic content from a certified laboratory. This is the definitive method to assess your water quality. Relying on public area measurements alone cannot reveal your home's water arsenic concentration or whether your existing treatment is sufficient.

If You Wonder How Seasonal Variation Affects Arsenic, See What the Record Shows for Roane County

The arsenic measurements from July 16 to July 18, 2018, provide a snapshot rather than a longer-term trend. There is no extensive seasonal or multi-year data in this sample set. Therefore, it is unknown if arsenic levels fluctuate significantly over time in this area. Monitoring multiple samples across different seasons would clarify this for your well.

To conclusively assess your home’s arsenic status, order a certified arsenic laboratory test on your actual water supply. A result below the federal threshold can confirm effective control, while levels near or above signal a need for enhanced treatment. For households where current equipment cannot manage arsenic adequately, the Autotrol Arsenic Filter system ships ready to configure for direct purchase. It is documented to address arsenic presence efficiently when properly matched to your water quality profile.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2018-07-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 317DKRD aquifer (Roane County): 4 results from 4 wells, median 12.75 ug/L, range 0.37-26.4 ug/L; none above any federal threshold