Sample Size and Well Depth: What Emanuel County Arsenic Data Shows
The United States Geological Survey (USGS) collected arsenic measurements from three separate wells in Emanuel County in the 120FLRDU aquifer. These wells, sampled four times between July 2013 and August 2024, ranged in depth from 289 to 432 feet. Among the four sampled results, arsenic was detected in three cases, with concentrations ranging from 0.04 to 0.31 micrograms per liter (µg/L), and a median value of 0.24 µg/L. Importantly, none of these results exceeded any federal arsenic threshold. While this data offers insight into arsenic presence in the regional aquifer, the limited number of wells and samples provides only a snapshot of the area’s water quality and is not an assessment of any individual household’s well water.
Treated Water at the Tap: Improvements with the Fleck Arsenic Filter
For households experiencing issues due to failed existing equipment targeting arsenic, water treated through the Fleck Arsenic Filter represents a documented solution that can reduce arsenic concentration effectively. This Fleck system functions to remove arsenic before water reaches household taps, improving water quality and peace of mind. While the exact improvement depends on the initial arsenic level in your own well water, this filter ships ready to configure and supports residential water treatment needs without requiring replacement of previous setup components.
Additional Considerations for Commercial and Industrial Water Users
Although this page focuses on residential water use in Emanuel County, commercial or industrial users face additional complexities. These include larger volume demands, regulatory reporting requirements, and potential impacts on manufacturing processes or equipment. While the Fleck system serves well in household settings, larger operations may need to consider multiple units or specialized configurations to meet their specific arsenic management and operational needs.
Public Water System Records Versus Private Well Testing
Public water systems maintain arsenic monitoring records that cover a broad population and often undergo regular testing and compliance checks. For private wells like those sampled in Emanuel County, testing is less frequent and typically performed by homeowners or specialists. Public system data can offer regional trends and median values, as seen here, but it does not substitute for testing your own water source. Only direct analysis of your well water can establish the arsenic level your household actually encounters.
Reading a Certified Laboratory Arsenic Test Report
A certified laboratory report for arsenic will provide a concentration value measured in micrograms per liter (µg/L), sometimes noted as parts per billion (ppb). The report indicates whether arsenic was detected, and if so, at what level. The detection limit represents the lowest concentration the lab can measure reliably. It is important to understand that detection of arsenic does not automatically indicate a violation of federal standards, which typically set a maximum contaminant level of 10 µg/L for arsenic in drinking water. Interpretation should follow the guidance of local health authorities or water quality professionals.
For households in Emanuel County measuring demand for arsenic reduction after equipment failure, the Fleck Arsenic Filter provides a practical, ready-to-configure option. It addresses arsenic at the tap, tailored to the levels you observe in your own water tests.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-08-19. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 120FLRDU aquifer (Emanuel County): 4 results from 3 wells, median 0.24 ug/L, range 0.04-0.31 ug/L; none above any federal threshold