Autotrol Acidic Water + Hard Water (Well) System

Buy Now

View full details

If Your Water Test Report Shows Hardness Measurements, Here’s What It Means for You

Laboratory reports for water hardness often list concentrations of calcium and magnesium ions, expressed in milligrams per liter (mg/L). This reading represents the total hardness from these minerals, which can cause scale buildup, dullness in laundry, and other household effects. In Cumberland County’s aquifer 112GLCL, samples collected by the U.S. Geological Survey between 2015 and 2017 show a median hardness of 44.5 mg/L across seven wells, with individual results ranging from as low as 9.22 mg/L to as high as 271.0 mg/L. None of these readings exceed federal standards for health concerns, but higher hardness can still impact your plumbing and appliances.

If You Need to Maintain Your Treatment System Regularly to Manage Acid and Hardness

The Autotrol Acidic Water + Hard Water (Well) System is designed to handle a grain capacity of 32,000, meaning it can treat a significant volume of hard water before requiring replenishment of treatment media. Proper maintenance involves monitoring system capacity and replenishing treatment components according to the system's usage patterns rather than calendar time alone. This rhythm ensures continuous management of both acidity and hardness without unexpected declines in performance for your household water.

If You Want to Know How the Autotrol System Treats Acid and Hardness in Your Well Water

This system works by neutralizing acidity and reducing hardness minerals in your water. It applies a multi-stage approach: first addressing the pH balance to reduce acid-related effects, then softening water by exchanging hardness ions like calcium and magnesium with sodium or potassium ions. This process helps prevent scale formation and reduces the corrosive potential often associated with acidic water. The system ships ready to configure for straightforward setup with existing household plumbing.

If You Are Trying to Understand What 'Detected,' 'Median,' and 'Range' Mean for Your Area’s Water Quality

'Detected' means the instruments measuring water samples found measurable hardness minerals in every tested well. The 'median' value of 44.5 mg/L indicates the middle point of hardness levels among the sampled wells—half had results below this number and half above. The 'range' from 9.22 mg/L to 271.0 mg/L reflects variability between wells from shallower to deeper depths (22 to 70 feet). These statistics describe the conditions across multiple wells in the aquifer, not any single well or household water supply.

If You Are a Business or Facility Manager, Additional Considerations May Apply

Commercial and industrial operations may require water quality consistent with specific process needs beyond household treatment. This can include continuous monitoring, higher treatment capacities, and compliance with industry regulations that differ from residential standards. While the Autotrol System provides excellent performance for households, larger or specialized operations might need evaluations tailored to their water usage and quality requirements.

If You Want to Know How Sample Depth and Source Affect Water Hardness Expectations

The wells sampled ranged from 22 to 70 feet deep, demonstrating that hardness can vary with depth even within the same aquifer. Shallower wells might show different hardness levels compared to deeper ones due to geological or environmental factors influencing mineral content. Knowing your well depth aids in interpreting the likely range of water hardness but confirming your specific water chemistry requires direct testing of your own supply.

In summary, government sampling in Cumberland County's aquifer 112GLCL shows a consistent presence of calcium and magnesium hardness minerals within a wide but non-critical range. This data assists households in understanding broad regional water conditions while emphasizing the importance of personal water testing to address specific acid and hardness challenges. The Autotrol Acidic Water + Hard Water (Well) System offers a documented option to manage these issues effectively. For detailed government data, visit the U.S. Geological Survey monitoring location 435014070264901.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-10-04. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112GLCL aquifer (Cumberland County): 25 results from 7 wells, median 44.5 mg/L, range 9.22-271.0 mg/L; none above any federal threshold