Sizing Your Treatment for Acidic Hard Water in Citrus County Aquifer 112NRSD
$2,647.77
Autotrol Acidic Water + Hard Water (Well) System
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
Water Hardness and Acidity in Citrus County Aquifer 112NRSD
Government groundwater sampling by the U.S. Geological Survey looked at wells in Citrus County's aquifer 112NRSD. Samples from three separate wells, taken between December 2011 and December 2012 at depths of 9 to 18 feet, showed hardness levels (measured in calcium and magnesium) ranging from 24.3 to 174.0 mg/L with a median of 61.8 mg/L. All five recorded results showed hardness above the detection limit. None of these readings exceeded federal safety thresholds.
Hardness in water comes mainly from calcium and magnesium minerals dissolved naturally as water passes through soil and rock. While not a health risk, hard water can cause scaling in pipes and appliances, reduce soap effectiveness, and affect taste and cleaning. Acidity, or low pH levels, can contribute to corrosiveness, causing metals from plumbing to leach into water and potentially damaging fixtures.
The Importance of Correct Treatment Sizing
Because hardness levels vary significantly across sampled wells, knowing the specific hardness of your household water is essential for sizing treatment equipment correctly. Overestimating capacity can mean unnecessary expense and maintenance; underestimating can result in incomplete treatment and persistence of hardness problems.
To determine the proper size for your water treatment system, you need a test of your own water's hardness and acidity. This test will provide the precise concentration of calcium, magnesium, and the pH level. The government data inform you about typical regional ranges, but individual wells can differ greatly from these numbers.
What to Test in Your Water
- Hardness level expressed as mg/L of calcium and magnesium.
- pH level to determine acidity, as acidic water can cause corrosion.
- Water usage rates to establish daily treatment capacity needs.
How the Autotrol Acidic Water + Hard Water (Well) System Helps
This system uses neutralizer technology designed specifically for water with combined acidic and hardness challenges. It operates with a grain capacity of 32,000, which refers to the amount of hardness it can effectively treat before regeneration. Neutralizing acidic water raises pH to reduce corrosion risks, while also softening by reducing hardness minerals.
Because the effectiveness depends on the water’s specific conditions and volume, correct sizing based on your own test is critical. The system ships ready to configure, aligning with your requirements without need for specialized personnel.
Summary
The government provides valuable insight into hardness levels typical of the Citrus County aquifer 112NRSD, but individual water testing is necessary to size treatment accurately. Testing for hardness and acidity alongside household water use will guide the capacity needed. The Autotrol Acidic Water + Hard Water (Well) System’s neutralizer technology offers a documented solution to simultaneously treat acid and hardness when properly sized.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2012-12-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 112NRSD aquifer (Citrus County): 5 results from 3 wells, median 61.8 mg/L, range 24.3-174.0 mg/L; none above any federal threshold