WSP Whole House Water Softener

Many water softeners fail because they regenerate on a timer, not on actual water use. The WSP Whole House Water Softener measures your water use and regenerates only when needed, helping reduce scale buildup, spotty dishes, and soap that won’t lather, all without wasting salt or water.

Why Your Old Softener Didn’t Fix Hard Water

Have you noticed scale deposits on your showerhead, a film on your dishes, or stiff towels even after washing? You might have already tried a water softener that seemed promising but didn’t deliver. That’s often because it regenerated on a fixed schedule, using salt and water whether you needed it or not. This can leave hardness minerals in your water between cycles, so you still see scale and spotty dishes. Also, older systems may not rinse the resin fully, reducing their softening power as time goes on.

How the Control Head Works to Save You Salt and Water

The control head on this system is metered and demand-initiated, meaning it tracks your actual water use and regenerates the softening resin only when it’s spent. This avoids unnecessary regeneration cycles, saving salt and water compared to older timer-based units. It also includes an automatic backwash cycle that lifts and rinses the resin bed to keep it working efficiently. A digital display makes setup and status checks straightforward, so you know exactly what the system is doing.

The Media Inside: What Softens Your Water

Inside the tank is a high-capacity cation exchange resin, specifically designed to target hardness minerals like calcium and magnesium. This resin catches these minerals and swaps them for sodium, which doesn’t cause scale. This process helps reduce limescale buildup on your fixtures and appliances, leaving your water feeling softer. The even flow through the resin bed ensures the full volume treats your water, not just part of it.

The Tank Size and What It Means for Your Home

The system includes a 9-inch diameter by 48-inch tall tank holding about 1 cubic foot of resin. This size provides about 32,000 grains of softening capacity, which suits an average family home with two to four people and up to two bathrooms. The tank is made from corrosion-resistant materials, so it won’t rust and is designed to last decades under normal household pressure.

Is This Water Softener Right for Your Household?

This softener fits well for homes with two to four people and one or two bathrooms. It handles typical daily water use without frequent regeneration, making it more efficient and cost-effective to run. If your household is larger or has higher water demand, consider sizing up to a system with greater capacity. Conversely, for a single-person household or a small apartment, a smaller unit might be more appropriate.

What Comes with Your Purchase and Next Steps

Your order includes the tank with the cation exchange resin inside and the control head mounted on top. A bypass valve comes standard, letting you isolate the softener during maintenance while keeping water running to your home. Also included is 10 feet of discharge hose for the drain line. The tank carries a lifetime warranty, giving you long-term peace of mind. The control valve and electronics have the manufacturer’s own warranty terms. Shipping in the U.S. is free and included in the price. Once you place your order, you can arrange for your local licensed plumber to handle installation and setup.

Who this size is right for

At 32,000 grains of capacity this suits an average family home - around 2-4 people with 2 bathrooms.

Sizing is a trade-off, not a target. Go bigger and it regenerates less often and uses less salt per gallon softened; go smaller and you will find the soft water running out before the next cycle. When in doubt, up. Send us your water test if you would like the sizing checked before you order.