Deciding on Treatment for City Hard Water and Iron in Craighead, Greene, and Poinsett Counties
$2,295.56
Fleck City Hard Water + Iron System
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
Steps to Narrow Down Your Water Quality Concerns
Start with Visual and Performance Checks at Problem Points
Check your faucets, showerheads, and water-using appliances for signs of hard water effects like mineral buildup or staining. Iron presence often leads to reddish or rusty color in water or on fixtures. These signs help target where treatment may be most needed.
Consider Basic Water Testing Kits Before Laboratory Analysis
Home testing kits can measure hardness and iron approximately, giving a preliminary picture. These kits are inexpensive and can help decide if more detailed testing is warranted.
Order a Certified Laboratory Test for Definitive Data
A certified lab test is the most reliable way to confirm hardness levels and iron content in your household water. This step is essential to choose an appropriate treatment system tailored to your water’s specific needs.
Household Fixtures and Appliances Most Affected by Hard Water and Iron
Water-Heaters and Boilers Experience Efficiency Loss
Hard water minerals accumulate inside tanks, reducing heat transfer and increasing energy use. Iron deposits can also lead to rust and damage.
Clothes and Dishwashing May Show Stains and Reduced Cleaning Performance
Iron can cause reddish stains on fabrics and dishes, while hardness minerals reduce soap effectiveness, causing spotting and film residues.
Faucets and Showerheads Can Become Clogged and Discolored
Mineral deposits restrict flow and create unsightly buildup. Iron compounds contribute to reddish-brown stains that affect appearance and cleaning ease.
Information to Gather Before Exploring Treatment Systems
Document Your Water Supply Source and Service Area
Your water comes from groundwater sources via the JONESBORO WATER SYSTEM serving 81,888 people in 36,403 connections across Craighead, Greene, and Poinsett Counties.
Record Any Previous Water Testing Results You Have
Include both home test kit results and any certified lab data available. Note dates and parameters measured.
List Specific Problems Observed in Your Home Water Usage
Identify which fixtures show buildup or staining, where water quality seems poorest, and appliance performance issues.
Understanding EPA Sampling Terms in Your System’s Water Quality Record
What 'Detected' Means for Water Constituents
'Detected' means instruments have measured the substance in the water supply. It does not imply that the amount is unsafe or unusual, just that it is present at measurable levels.
The Meaning of 'Median' and 'Range' Values
Median is the middle concentration found in samples collected over a time period, while range shows the lowest and highest measured levels. These describe system-wide patterns, not individual household conditions.
Interpreting Certified Laboratory Test Reports
How Iron and Hardness Concentrations Are Reported
Lab results give concentrations usually in milligrams per liter (mg/L). These figures help understand the severity of hardness and iron and guide the selection of treatment.
Knowing What Parameters Matter for Your Water
Testing specifically for total hardness and iron is key, alongside other parameters that may affect treatment choice. Confirm the lab uses accepted methods for these analyses.
Final Step: The One Water Test That Clarifies Treatment Needs
Order a certified laboratory test measuring total hardness and iron concentration from a sample taken at your home's main water entry. This result will decisively indicate if a water softening and iron removal system like the Fleck City Hard Water + Iron System with a 32,000 grain capacity is appropriate to improve your water quality.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2025-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA SDWIS record for JONESBORO WATER SYSTEM (AR0000124), groundwater supply, serving 81888 people: 0 health-based violations of 2 total; lead 90th percentile 0.001 mg/L