Residential Chromium-6 Concerns and Treatment Options in Burlington, Camden Areas
Laboratory Reports and Chromium Speciation in Water
A laboratory test for chromium in water typically specifies total chromium and may separately list chromium(VI), also known as hexavalent chromium or chromium-6, often measured in micrograms per litre (µg/L) or parts per billion (ppb). For the public water system serving Audubon Boro, Camden City, Cherry Hill, and surrounding areas in Burlington and Camden counties, chromium-6 was detected in 18 of 40 samples with values ranging from just above 0.03 µg/L (the reporting level) up to 1.28 µg/L, with a median detection concentration of 0.595 µg/L. Total chromium was detected in 13 samples, with reported levels up to 1.8 µg/L. These figures come from EPA's Unregulated Contaminant Monitoring Rule (UCMR3) conducted between 2013 and 2015.
Oxidation State Changes from Source to Tap
Hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) differ chemically and biologically. Cr(VI) is more soluble and mobile, while Cr(III) tends to form insoluble compounds. In the water supply chain—from surface water sources through treatment plants to distribution mains and household taps—the oxidation state of chromium can change due to chemical reactions, pH, and oxygen levels. These changes mean a chromium-6 reading at the treatment plant may not exactly match what enters individual homes, as some hexavalent chromium may convert to trivalent chromium along the way, altering concentrations and forms.
Comparing Ion Exchange and Reverse Osmosis for Chromium(VI)
Two common treatment approaches affect chromium-6 differently. Ion exchange methods typically target dissolved ionic species and can capture chromium(VI) by exchanging it with other ions, effectively reducing its concentration. Reverse osmosis (RO), on the other hand, uses a semipermeable membrane to filter out a broader range of dissolved solids, including chromium species. RO can remove chromium-6 and total chromium more comprehensively but produces a waste stream that requires proper handling. Both methods vary in efficiency depending on water chemistry and flow rates.
Sources of Hexavalent Chromium in Water Supplies
Hexavalent chromium can originate from natural geological sources or industrial activities. Geogenic hexavalent chromium typically occurs in certain arid or alkaline aquifers, where soil and rock minerals leach chromium(VI) into groundwater. In contrast, industrial plating and manufacturing can introduce chromium-6 to surface or groundwater through discharges. The water system for Burlington and Camden counties draws from surface water sources, where chromium-6 levels reflect a combination of natural background and historical or current industrial influences in the broader watershed.
How the C-Series Chromium-6 Filter Addresses Chromium(VI)
The C-Series Chromium-6 Filter ships ready to configure and employs an advanced filtration technology designed specifically to target hexavalent chromium in residential water. By applying specialized media capable of adsorbing or chemically transforming chromium(VI), the system reduces the chromium-6 concentration in household water, helping to supplement existing equipment that may not fully keep up with chromium-6 presence. This approach enables households dealing with chromium-6 to manage water quality with a tailored treatment solution.
Interpreting Public System Data versus Private Well Testing
Data from public water system records reflect measurements across many sources and distribution points. These are not direct measurements of individual household taps. While the system serving Burlington and Camden records chromium-6 detections, these are averages and ranges from broad sampling campaigns and should not be interpreted as fixed levels in any particular home’s water. Only a specific laboratory test of a household’s water sample can establish its unique chromium-6 concentration. Private well owners or households with their own water sources need separate testing to determine their actual exposure.
Understanding What Area Data Does and Does Not Indicate
Residents should note that chromium-6 detection in regional water system monitoring does not equate to a health-based violation or indicate unsafe water. The EPA has not established a maximum contaminant level (MCL) specifically for chromium-6, although a total chromium MCL exists at 100 µg/L — much higher than levels detected in this area. Detection simply means that chromium(VI) was measured above a reporting threshold during sampling. Use of the C-Series Chromium-6 Filter or other treatment options can offer additional peace of mind for households wishing to manage chromium-6 levels beyond what existing equipment achieves.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2014-02-06. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA UCMR3 monitoring (2013-2015) for NJ American Water Co. - Western (NJ0327001), NJ: 80 results across 2 listed contaminants, 31 detections above the reporting level; no federal MCL for hexavalent chromium; total chromium MCL 100 ug/L

