1" x 1" FxF 24" Flex Connection

The RectorSeal 1" x 1" FxF flexible connector in a 24-inch length blends full-flow capacity with extended reach. Its 1-inch bore supports higher-flow water-treatment systems, while the longer corrugated body spans supply lines and equipment that sit farther apart, making it a versatile pick for demanding whole-house installations that also need a little extra length to reach the appliance ports.

• 1" x 1" female-by-female threaded ends
• Long 24" run for greater routing flexibility
• Full 1-inch bore minimizes flow restriction
• Corrugated construction absorbs misalignment
• Around 1 lb for durable service
• From RectorSeal, a plumbing-supply mainstay

This connector shines when a higher-flow softener, filter, or trunk-line install also calls for distance, such as routing around obstructions or spanning a wider gap between the wall stub-out and the equipment ports. Combining 1-inch flow with a 24-inch reach handles those cases without adding couplers or custom pipe, keeping the run simple and reducing the number of joints where leaks could later develop. Holding the full 1-inch bore through the connection helps preserve pressure at the fixtures, which is exactly what high-demand systems rely on during peak draw, and the extra length gives you room to make a clean approach to the port instead of forcing a tight turn.

The corrugated body flexes to accommodate real-world alignment, taking strain off the threaded joints so they stay watertight despite the vibration and minor movement that come with normal operation. During installation, use potable-rated sealant, support the body while tightening to avoid kinking the corrugations, and leave a gentle curve rather than a sharp bend in the run. Snug each end firmly without forcing it, then pressure-test to confirm both ends are sealed before returning the system to service. With matching 1" ends, it also serves as a straightforward replacement for an aging connector on an established system without re-plumbing the nearby fittings. The extra length is welcome in deeper mechanical rooms and basements, where the supply and the appliance can sit a couple of feet apart and a shorter connector would force you to add pipe. For installers building or servicing larger whole-house setups that demand both flow and reach, this 1" FxF 24-inch connector is a dependable, flow-friendly solution for the toughest hookups.