Whole-Home Drinking Water in Palm Beach Gardens: Understanding System Sampling and What Comes Next
$1,476.56
PFAS Water Filter System - Safe Family Drinking
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
What a certified laboratory test for this constituent reports and how to read it
Results reflect specific samples, not all water at all times
Water testing performed by a certified laboratory generally measures concentrations of substances at the moment and location of sampling. For the Seacoast Utilities Authority system serving Palm Beach Gardens, this includes a variety of parameters related to groundwater-sourced water. Notably, lead levels reported are from plumbing distribution samples, which differ from raw source water.
Percentile reporting describes typical versus extreme values
Lead concentrations are often summarized using the 90th percentile, meaning 90% of samples fall below this value. For example, the 90th percentile lead concentration for this system was 0.0016 mg/L as measured in June 2025, indicating most samples showed lead at or below this level.
Why aesthetic secondary standards differ from health-based limits, applied to this constituent
Secondary standards address taste, odor, and appearance—separate from safety
Some water quality parameters have secondary, non-enforceable standards aimed at preventing taste issues or staining of fixtures. These are not health-based limits and their exceeding does not imply unsafe water. Understanding these distinctions can help clarify water quality concerns.
Health-based standards are established to protect consumers' well-being
The Environmental Protection Agency (EPA) applies health-based limits to certain contaminants, which are enforceable for public water systems. Two health-based violations have been recorded historically for this system but do not necessarily reflect current conditions.
What the measured range means against the relevant federal standard, and what it does not mean
Range data indicate the diversity of sample results, not individual household exposure
Sampling records include ranges showing minimum to maximum measured values across all samples. This does not indicate that any one household water system currently experiences those extremes.
Detecting a substance is not equivalent to surpassing a safety threshold
A detection means the substance was measured by instruments during sampling. It does not imply a violation or unsafe condition by itself, nor does a value below a standard indicate absence of the substance.
The role of plumbing material and age, separate from the source water
Lead presence in samples often comes from internal plumbing, not source water
The lead 90th percentile measurement in this system reflects plumbing distribution sample results — lead can enter water through pipes, solder, or fixtures. This is distinct from contamination in the groundwater source itself.
Testing your household water independently provides specific information
Because sampling data applies system-wide and includes plumbing contributions, a certified laboratory analysis of your home's water is the only way to know your actual water quality after equipment failure.
What questions a commercial or industrial operator adds that a household does not
Regulatory compliance and process suitability require detailed system knowledge
Commercial and industrial users must consider treatment system design, regulatory permits, and water chemistry impacts on equipment and processes. Their testing regimes are broader and more frequent.
Households focus primarily on safety and palatability for drinking
Household concerns usually center on removing taste, odor, and health risks for drinking water through appropriate treatment solutions tailored to their water quality.
What ‘detected’, ‘median’ and ‘range’ mean in the sampling record on this page
Detected means the substance was found at some level in one or more samples
This does not equate to a violation, only that the constituent was measured.
Median provides the middle value in the dataset, dividing higher and lower halves
The median concentration represents the typical level found in samples but is not a health statement.
Range shows the lowest and highest values measured in any samples collected
This helps understand variability but is not a direct measure of any individual tap water.
What test to order next and what result settles the question
After experiencing a failure of existing water treatment equipment, the critical step is to obtain a certified laboratory test of your household tap water, analyzing for relevant contaminants including lead and other metals. A report showing all concentrations below EPA health-based limits confirms the need for maintenance or upgrade but indicates no immediate health concern. If levels exceed guidance, a documented approach like the C-Series Whole-Home + Drinking Combo System, with 32,000 grain capacity, can provide comprehensive treatment tailored to your home’s specific water profile and needs.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2025-06-01. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA SDWIS record for SEACOAST UTILITIES AUTHORITY (FL4501124), groundwater supply, serving 97552 people: 2 health-based violations of 59 total; lead 90th percentile 0.0016 mg/L