Fleck Whole-Home + Drinking Combo System

Buy Now

View full details

1. What a Certified Laboratory Test for Wilmington Water Reports and How to Read It

If you have your home's water tested by a certified laboratory, the results will report concentrations of various substances in milligrams per liter (mg/L) or parts per billion (ppb). These reports indicate what was detected at your tap at the time of sampling and reflect your household's specific plumbing and water use.

It is important to distinguish these individual results from the data collected by the Wilmington Water Department, which reflect the overall public water system performance and treatment. Your household's water can vary due to pipe materials, residence-specific factors, and plumbing.

2. How Wilmington Water Differs at the Tap After Using the Fleck Whole-Home + Drinking Combo System

Once water treatment is in place using the Fleck Whole-Home + Drinking Combo System, you can expect improved water quality throughout your home. This system conditions the entire water supply, helping to address issues like taste, staining, or other secondary effects caused by dissolved solids.

Specifically, the Fleck System operates with a grain capacity of 32,000, allowing it to manage water flow and treatment over extended periods efficiently. It combines both whole-home and drinking water treatment to provide consistent quality water from every tap.

3. How Constituents Enter Wilmington’s Distribution System

The Wilmington Water Department sources its water from surface water, supplying over 107,000 people via nearly 38,000 connections. Surface water can pick up various dissolved minerals and constituents as it flows through the environment. The water undergoes multiple treatment processes to meet EPA standards, including removal and control of substances that might affect water quality.

The public water system record shows one EPA health-based violation out of five considered for the system. This record helps establish system-level water quality but does not specify individual household conditions or concentrations found at your tap.

4. A Worked Example: Reading Wilmington Water System Data as a Homeowner

Looking at recent data, the lead 90th percentile is reported as 0 mg/L sampled at the end of 2023. This figure reflects plumbing and distribution system sampling rather than source water content. It means that lead levels measured in customer taps are generally very low, near zero, in most samples tested.

This information suggests that, for chemical constituents influencing secondary effects or health-based standards, the public system maintains levels mostly within EPA guidelines. However, because individual homes can have unique plumbing conditions, your water might differ — personal lab testing is recommended for precise measurement before sizing treatment.

5. Maintenance Rhythm of the Fleck Whole-Home + Drinking Combo System in Plain Terms

The Fleck system is designed for ease of upkeep, requiring periodic checks to ensure proper function. Its grain capacity of 32,000 means it can handle typical household water demand before needing regeneration or servicing.

Households should monitor water flow and quality indicators periodically. When flow decreases noticeably or taste and appearance change, it’s a good time to evaluate system performance. The system ships ready to configure, so it can be operated and maintained by the household without special services.

6. What to Write Down Before Seeking Treatment Advice

• Note your household water consumption patterns and number of residents.
• Have the public water system data handy from Wilmington Water Department.
• Obtain lab test results specific to your home to identify actual concentrations of relevant constituents.
• Record any water quality issues you observe, such as taste, staining, or cloudiness.
• If possible, measure hardness or total dissolved solids with a home test kit to understand conditioning needs.

Having this information enables targeted advice tailored to your household’s water profile and demand.

Closing

For households in Wilmington, New Castle County, the Fleck Whole-Home + Drinking Combo System offers a reliable solution to address whole-home drinking water treatment needs. Its 32,000 grain capacity suits sizing demands based on your household's consumption, supported by local public water data and your home's specific testing results.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2023-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA SDWIS record for WILMINGTON WATER DEPARTMENT (DE0000663), surface water supply, serving 107976 people: 1 health-based violations of 5 total; lead 90th percentile 0 mg/L