A laboratory test report for iron content in groundwater from St. Louis County, Missouri, specifically the aquifer labeled 111ALVM, typically lists concentrations by micrograms per liter (ug/L). For example, sampling conducted on November 7, 2013, from two wells 25 to 80 feet deep in this area showed iron detected in all four results, with a median value of 5420 ug/L and a range between 4580 and 6200 ug/L.
What Public-System Records Show versus What Private Well Tests Establish
Government data from public or area-wide sampling provides valuable insights into the typical range of constituents like iron in the local aquifer but do not reflect individual private well conditions. These records do not replace a well-specific laboratory analysis. Only testing your own well water can precisely identify your iron concentration and related water quality attributes.
How Treated Water Quality Changes at the Tap with Effective Conditioning
When a well water treatment system is configured to address rust and hardness, the water that reaches your taps can have significantly reduced metallic staining and scale formation. Proper water conditioning minimizes the iron particles that cause reddish-brown stains and alleviates hardness minerals that lead to scale buildup in plumbing and appliances, improving both water appearance and performance.
Steps to Diagnose Water Quality Issues: From Basic Checks to Lab Testing
- Start by inspecting water coloration and stains on fixtures for signs of rust and hardness effects.
- Check any existing water treatment equipment for performance issues or failures, as these can affect water quality.
- Consider basic home water tests that offer preliminary information on iron and hardness levels.
- Arrange for a professional laboratory analysis of your well water to obtain accurate measurements of iron concentration and hardness parameters.
How to Interpret Median and Range Values from Area Samples as a Homeowner
The median iron concentration of 5420 ug/L from St. Louis County aquifer 111ALVM samples indicates that half the measured results were above this level and half below, while the range from 4580 to 6200 ug/L shows variability across wells sampled. These figures suggest iron is commonly present at these levels in the area but do not imply your own well water matches these exactly. Understanding this spread helps homeowners anticipate potential water quality concerns and the need for effective treatment.
How the Documented Water Treatment Technology Addresses Well Rust and Hardness
The Pentair Well Rust + Hardness System is designed to reduce iron-related rust stains and the effects of hardness minerals in well water. With a grain capacity rated at 32000, this water treatment solution manages the iron and hardness loads typical of St. Louis County's aquifer conditions. It operates by conditioning water to minimize staining and scale, helping restore water quality after an equipment failure has compromised previous treatment.
For homeowners in St. Louis County facing rust and hardness issues with existing equipment no longer effective, the Pentair Well Rust + Hardness System ships ready to configure and offers a proven approach based on documented aquifer data and treatment capacity.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-11-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 111ALVM aquifer (St. Louis County): 4 results from 2 wells, median 5420.0 ug/L, range 4580.0-6200.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.