1. What to Record Before Seeking Treatment Advice
Before considering any treatment option for rust and hardness in your well water, note essential details about your water source. Write down your well depth, if known, and any water quality test results you have, particularly focusing on hardness measures like calcium and magnesium. Also, track when and where you had your water tested, as this context helps in understanding fluctuations and potential treatment needs.
2. Understanding 'Detected,' 'Median,' and 'Range' in Local Sampling Data
In the Navajo County aquifer 220NAVJ, groundwater sampling by the U.S. Geological Survey found hardness, measured as calcium and magnesium, was detected in every tested sample—40 results from 14 wells ranging in depth from 554 to 3737 feet between 2010 and 2019. The median hardness was 2.935 mg/L, with values spanning from 1.23 to 163.0 mg/L. Here, 'detected' means the elements were measurable, 'median' is the middle value when all results are ordered, and 'range' shows the spread between the lowest and highest values. These figures represent regional conditions, not your specific well.
3. Interpreting Sample Size and Its Implications
The data comes from 14 wells with multiple samples each. While this offers a solid regional picture, a sample size of this scale means individual well conditions can differ. Small sample numbers limit how precisely these values predict your water's hardness. Therefore, you should view these figures as guidance, not a direct map of your home's water quality.
4. Steps to Narrow Down Your Water Hardness and Rust Sources
Begin by visually inspecting your water for rust discoloration or scaling. Next, test your water hardness through a home testing kit or send samples for laboratory analysis to measure calcium and magnesium concentrations precisely. Comparing your results with the regional data helps determine whether your well water fits within typical ranges or if it may require targeted treatment.
5. What Changes at the Tap After Using the Pentair Well Rust + Hardness System
When configured, the Pentair Well Rust + Hardness System targets particles and minerals associated with rust and hardness, such as calcium and magnesium, providing relief from scaling and staining issues common in Navajo County wells. Treated water often appears clearer, tastes better, and reduces wear on plumbing and appliances. This system features a grain capacity of 32,000, helping ensure extended effectiveness before maintenance is necessary.
Deciding on water treatment this week involves understanding your water conditions and matching solutions that fit those needs. Using the documented water quality data for Navajo County alongside testing your own well water puts you in a strong position to evaluate options. The Pentair Well Rust + Hardness System ships ready to configure and can address the hardness levels aligned with the demand your test results reveal.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-08-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 220NAVJ aquifer (Navajo County): 40 results from 14 wells, median 2.935 mg/L, range 1.23-163.0 mg/L; none above any federal threshold