Fleck Well Rust + Hardness System

Buy Now

View full details

1. Noticing Plumbing Material and Age Effects on Rust Appearance

When rust-colored staining or sediment appears at faucets or in water-using appliances, it may reflect corrosion of older iron or steel plumbing components rather than the water source alone. Plumbing made from materials prone to oxidizing can cause rust-colored water even if the water supply is low in iron content. Age and condition of pipes or fixtures contribute independently to how rust shows up in household water.

2. Comparing Kankakee County’s Water Quality with Neighboring Counties

Kankakee County’s groundwater aquifer 110QRNR has documented iron concentrations based on 14 samples from 7 wells, with iron detected in 6 samples at levels between 3.9 and 6820 micrograms per liter. These figures can be compared with nearby counties’ data to gauge regional trends. However, differences in geology and sampling methods mean these comparisons are approximate. Avoid assuming identical water quality in your well based solely on regional data.

3. Understanding Differences Between Public Systems and Private Wells

Public water systems often have more extensive monitoring and treatment than private wells. The regional data discussed here come from groundwater samples that represent a range of private well depths in the aquifer rather than treated municipal water. Private well owners should recognize that local public system records do not directly measure their own water quality but provide context for possible constituents.

4. Observing Seasonal and Multi-Year Variation in Iron Levels

Sampling dates ranging from July 2011 to June 2021 show a range of iron concentrations in local groundwater. These variations can result from changes in water table levels, rainfall, and aquifer chemistry over time. Homeowners may notice periodic changes in rust staining or hardness effects reflecting these natural fluctuations rather than a constant water condition.

5. Considering Sample and Well Depth Effects on Water Quality Expectations

The sampled wells in Kankakee County ranged from 12 to 23 feet deep. Shallower wells often have different iron and hardness profiles than deeper wells due to soil and rock contact. Knowing your well depth helps predict likely water quality issues but does not replace testing your own water to determine specific conditions.

6. Interpreting Median and Range Values to Understand Your Household Situation

The median iron concentration measured in aquifer 110QRNR is 587.5 micrograms per liter, with detections varying widely. This median indicates a moderate presence of iron across samples, which may contribute to rust staining and hardness commonly reported by homeowners. No federal threshold was exceeded, meaning these levels are within regulatory limits and do not imply health risk but may impact water aesthetics and appliance function.

For tailored control of rust and hardness effects in well water, the Fleck Well Rust + Hardness System offers a treatment capacity rated for 32,000 grains, addressing common residential needs through a configurable solution that ships ready for setup.

In summary, the U.S. Geological Survey provides this groundwater data from multiple wells in Kankakee County's aquifer 110QRNR to inform homeowners about typical iron presence in the area. These findings offer guidance but are not a substitute for individual well testing. The detailed water quality records are available directly from the government source for further reference.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-06-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the 110QRNR aquifer (Kankakee County): 14 results from 7 wells, median 587.5 ug/L, range 3.9-6820.0 ug/L; none above any federal threshold