Maintenance Rhythm for the Fleck Uranium & Radium System
Regular media capacity monitoring scheduled by grain capacity
The Fleck Uranium & Radium System has a documented media capacity of 32,000 grains. Homeowners should note that maintaining system performance involves monitoring usage relative to this capacity to determine when media regeneration or replacement is due.
Periodic system regeneration to maintain contaminant removal
While the system ships ready to configure, the technology requires periodic regeneration cycles to sustain effective removal of uranium and radium from water sources.
Interpreting Uranium Concentrations Against Federal Standards
USGS sampling shows detected uranium but no exceedances of federal limits
Sampling of six bedrock aquifer wells in York County from August to October 2011 identified uranium in all samples with a median concentration of 0.509 micrograms per liter and a range from 0.02 to 11.2 micrograms per liter. None of these results exceeded any federal uranium thresholds.
Detection does not imply a violation or unsafe water
It is important to understand that the presence of uranium at detected levels in this area does not indicate unsafe water or a regulatory violation. Detection means only that uranium was measured by instruments in the sampled wells.
Sources of Uranium and Radium in York County Bedrock Aquifers
Natural geological sources contribute uranium presence
Uranium and radium in groundwater in this region primarily originate from natural dissolution of minerals in the bedrock aquifer formations characteristic of York County.
Depth of wells sampled reflects typical residential well depths
Sampled wells ranged from 104 to 365 feet deep, aligning with standard depths for residential bedrock wells in York County, making these results relevant to many local households.
Additional Commercial and Industrial Considerations
Higher water volumes and treatment capacity demands
Commercial or industrial users may require treatment systems with larger grain capacities and more frequent system regeneration due to higher consumption rates.
Regulatory monitoring and documentation requirements
Operations beyond residential scale often face additional monitoring protocols and reporting obligations not applicable to typical households.
Variations for Large, Seasonal, or Secondary Homes
Adjust media capacity use for varied water consumption
Homes with larger occupancy or intermittent use should consider how infrequent water use or higher demands affect system regeneration schedules and media lifespan.
Storage and maintenance during extended vacancy
Seasonal properties need to plan for system care during periods of non-use to prevent degradation of treatment media and ensure performance upon return.
Stepwise Approach to Determine Uranium-Radium Water Quality
Begin with basic home water inspection and observation
Check for any unusual discoloration or staining that can sometimes accompany dissolved minerals, noting that these signs do not confirm uranium presence.
Obtain laboratory testing specific to uranium and radium
Arrange for a certified laboratory to analyze your own water supply. This testing is the only way to know your well water’s exact uranium and radium concentrations.
Final Recommendation: The definitive step is ordering a comprehensive laboratory analysis for uranium and radium in your household water. A result within or below federal standards confirms no exceedance. If results indicate higher levels, the Fleck Uranium & Radium System offers a proven treatment approach designed to reduce these constituents effectively.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2011-10-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Uranium in the BEDROCK aquifer (York County): 6 results from 6 wells, median 0.509 ug/L, range 0.02-11.2 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.