Pentair Uranium & Radium System

Pentair Uranium & Radium System

$1,617.00

Buy Now

View full details

The primary groundwater source for many homes in Tift County, Georgia, is aquifer 110QRNR. This aquifer feeds private wells and local water supplies, with well depths in sampled data ranging from 19 to 70 feet. Understanding uranium and radium levels here involves interpreting regional data and how it may relate to your own water supply.

Depth and Source Factors Affecting Uranium-Radium Levels

Sample Depth Range from 19 to 70 Feet

In Tift County, uranium was measured in wells drilled between 19 and 70 feet deep. Deeper wells might encounter different uranium concentrations than shallower ones, so your well depth can influence what uranium levels to expect.

Variation by Well Location and Aquifer Zones

Uranium concentrations can vary within the aquifer depending on geological conditions and water flow patterns. Wells in different locations within the aquifer may show distinct uranium readings.

Sampling Scope and Data Interpretation

Eight Wells Sampled Between May 4 and May 14, 2015

The U.S. Geological Survey collected water samples in Tift County from eight separate wells during this period, providing a snapshot of uranium levels across the aquifer.

Median Uranium Concentration of 0.2365 Micrograms per Liter

The median uranium detected in these samples was 0.2365 ug/L, with individual results ranging from 0.027 to 1.22 ug/L. All detections were below federal uranium limits.

Limited Sample Size Means Local Testing is Important

While regional data offers guidance, the small number of wells sampled means that individual well testing is needed to determine water quality at your home.

How Uranium and Radium Enter Groundwater in Tift County

Natural Geological Sources in Aquifer 110QRNR

Uranium and radium originate from the natural breakdown of minerals in rocks and soil. These elements can dissolve into groundwater as it moves through the aquifer’s geological formations.

Movement Through Soil and Rock Layers

Water percolates down from the surface, interacting with mineral layers and potentially picking up uranium and radium along the way, influenced by local geology and groundwater flow.

Evaluating Household Treatment Capacity Needs

Consider Daily Water Consumption Levels

Assess your household’s daily water use to choose equipment with adequate capacity. Larger households or those with higher water use require systems that can handle greater volumes.

Pentair Uranium & Radium System Capacity of 32,000 Grains

The documented Pentair System is rated for 32,000 grains capacity, providing a benchmark when comparing equipment choices to your household demand.

Maintenance Rhythm of the Pentair Uranium & Radium System

Planned Service Intervals Based on Usage

Maintenance frequency depends on water usage and uranium-radium load but generally involves regular media replacement and system checks to maintain performance.

Simple Ready-to-Configure Equipment Operation

The system ships ready to configure, designed for straightforward setup and upkeep without complex procedures.

Monitoring Water Quality Post-Treatment

Regular testing after treatment helps confirm the system’s effectiveness over time and informs maintenance timing.

Next Step: Testing Your Own Well Water

Because local sample data reflects regional aquifer conditions but not your specific well, order a comprehensive uranium and radium water test from an accredited laboratory. A measurement showing uranium below federal thresholds would indicate that treatment may be optional; higher readings would support considering a dedicated treatment system like the Pentair Uranium & Radium System.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2015-05-14. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Uranium in the 110QRNR aquifer (Tift County): 8 results from 8 wells, median 0.2365 ug/L, range 0.027-1.22 ug/L; none above any federal threshold

The right way to buy a water system: sized to your water, backed for life, free U.S. shipping.
💳 Buy now, pay over time with Shop Pay Installments  ·  🇺🇸 Free U.S. Shipping
  • ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
  • ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
  • ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.
Not sure what you need? Take the 60-second quiz →

Newsletter

A short sentence describing what someone will receive by subscribing