Understanding Pike County's Uranium-Radium Aquifer Data
Sampling applies to aquifer 344MNNG, not individual wells
Government monitoring sampled 14 wells in Pike County, aquifer 344MNNG, between 2011 and 2015. These wells ranged from 115 to 460 feet deep. The data provide an overview of what occurs in this aquifer region but do not reveal conditions in any single household well.
The recorded alpha particle concentrations span from -0.4 to 10.4 pCi/L
This range reflects detected alpha particle activity related to uranium and radium presence. Every sample detected this activity, with a median value of 0.6 pCi/L. Importantly, none of these measurements exceeded federal safety thresholds for alpha particle radiation.
Interpreting Pike County’s data requires cautious comparison
Comparing Pike County’s uranium-radium water data with neighboring counties can highlight regional trends but should not substitute for testing your own water source. Aquifer geology, depth, and local conditions differ, affecting uranium-radium levels.
Household Size and Property Use Influence Treatment Needs
Larger households may require higher treatment capacity
Water usage volumetrics impact how often a treatment system reaches capacity. The documented system discussed has a grain capacity of 32,000, which supports typical residential demand but might need review for larger families.
Seasonal or secondary homes may benefit from different maintenance schedules
Properties used part-time might experience different water stagnation or usage patterns, affecting the lifespan and performance rhythm of treatment media and components.
Maintenance Rhythm of the Fleck Uranium & Radium System
Regular media regeneration or replacement helps maintain effectiveness
The Fleck Uranium & Radium System is designed to handle uranium and radium presence by reducing alpha particle activity through ion exchange or similar technology. Maintenance follows a predictable cycle linked to usage volume and water quality.
The system ships ready to configure, allowing household setup flexibility
It arrives prepared for connection, requiring no professional fitting services but some familiarity with household water systems for proper operation.
Commercial or Industrial Questions Differ from Household Evaluations
Operators must consider regulatory reporting beyond residential concerns
Businesses often face additional environmental and safety documentation requirements when addressing uranium-radium, unlike most households.
Higher flow rates and continuous operation shift system sizing and servicing
Commercial sites generally demand equipment rated for larger volumes and more frequent media regeneration to keep up with continuous use.
Influence of Sample Depth, Well Depth, and Water Source
Greater well depth may correlate with different uranium-radium levels
Wells sampled ranged from 115 to 460 feet, affecting the uranium-radium concentrations detected. Deeper wells might draw water with a different mineral profile than shallower ones.
The type of source—such as drilled wells versus springs—shapes expected water quality
Different source types interact with aquifer geology uniquely, influencing uranium-radium presence and variation in water chemistry.
Clarifying Detected Values and Statistical Terms in the USGS Record
"Detected" means the instrument measured alpha particle activity above its reporting limit
Detection does not imply exceeding a health or legal benchmark; it simply confirms measurement presence.
"Median" indicates the midpoint value in the collected results, showing typical levels
The median value of 0.6 pCi/L reflects a central tendency among 65 samples but does not represent any individual well precisely.
"Range" expresses the spread of values recorded from the lowest to highest measurement
The range from -0.4 to 10.4 pCi/L reveals the variability within the aquifer samples, though no readings crossed federal limits.
These findings refer solely to the sampling of 14 wells from 2011 to 2015 in Pike County’s aquifer 344MNNG as reported by the U.S. Geological Survey (waterdata.usgs.gov/monitoring-location/411955074492101/).
For households looking to address uranium and radium in well water, testing of the specific water source is essential. The Fleck Uranium & Radium System offers a documented approach to reduce these constituents' presence, supporting safer water quality tailored to residential needs.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-09-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Alpha particle in the 344MNNG aquifer (Pike County): 65 results from 14 wells, median 0.6 pCi/L, range -0.4-10.4 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.