Uranium-Radium in Hillsborough County: Understanding Aquifer 112SRFD Water Quality Records
$7,949.00
WSP Whole House Uranium & Radium Reduction System
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
Understanding Hillsborough County Aquifer 112SRFD Water Quality Data
The aquifer labeled 112SRFD in Hillsborough County, NH, supplies water to homes drawing from groundwater sources 20 to 60 feet deep. Water from this aquifer travels from underground layers to household taps via well systems, which vary in depth and construction. Monitoring wells sampled between 2010 and 2019 reveal uranium concentrations with a median of 0.037 micrograms per liter (µg/L), detected in three out of five samples but always below federal limits.
Comparing Uranium Results with Neighboring Counties Without Overreading Data
When looking at uranium levels in Hillsborough County's aquifer, it's tempting to extrapolate concerns based on neighboring counties’ reports. However, groundwater conditions and geologic formations differ significantly across counties. Sampling in adjacent areas may show distinct uranium ranges or detection frequencies. It is important not to assign these regional figures directly to local wells since each site's geology and water dynamics vary. The Hillsborough County record alone does not establish that private wells will mirror these results either higher or lower.
Differences Between Public-System Records and Private-Well Testing in Uranium Establishment
Public water systems often conduct routine sampling and publish data that reflect composite or distributed water sources. These records provide a general picture of water quality in an area, but they do not replace the need for individual well testing. Private wells draw from specific underground formations which can differ even within a small radius. The public record from aquifer 112SRFD offers useful context but cannot determine a household's actual uranium or radium levels. Household-level testing is necessary to confirm conditions after existing equipment failure.
How Treatment Technology Removes Uranium and Radium
When uranium and radium are present in household water, treatment technology designed for these elements can effectively reduce their concentration. The C-Series Uranium & Radium System uses specialized media to capture and decrease uranium and radium levels from water as it passes through. This system, with a grain capacity of 32,000, ships ready to configure for residential use. It does not require complex assembly and provides a documented method of addressing uranium and radium after identifying the need through testing.
Seasonal and Multi-Year Variation in Uranium Concentrations
The US Geological Survey's samples from 2010 to 2019 show uranium detections varied slightly between 0.035 and 0.051 µg/L in the aquifer. Variations like these reflect natural changes in groundwater chemistry influenced by rainfall, water table fluctuations, and geology. No sample exceeded federal uranium limits, but natural variability means periodic retesting can be useful. These data demonstrate that uranium levels in the aquifer remain consistently low over time but do not guarantee static levels in any single well.
Stepwise Approach to Confirming Uranium and Radium Concerns
After failure of existing equipment, it is wise to start with less costly checks before specialized laboratory analyses. Begin by ensuring all plumbing components function properly and no external sources could affect water quality. Next, test water at the tap for general parameters like pH and hardness that could influence uranium behavior. Finally, order laboratory testing specifically for uranium and radium from certified labs to measure actual concentrations. This tiered approach balances cost and information needs.
Final Recommended Test
The single most definitive action is to have your household water tested by a qualified laboratory for uranium and radium levels. This test will provide the data needed to decide if treatment is necessary and to select suitable technology such as the C-Series Uranium & Radium System. Confirming your water's uranium and radium content settles the question and guides effective water quality management for your household.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-09-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Uranium in the 112SRFD aquifer (Hillsborough County): 5 results from 3 wells, median 0.037 ug/L, range 0.035-0.051 ug/L; none above any federal threshold