WSP Whole House Uranium & Radium Reduction System

Buy Now

View full details

Household vs Commercial Considerations in Uranium-Radium Water Concerns

It is a common misconception that concerns over uranium and radium in water are the same regardless of the user. In Greene County’s aquifer 112OTSH area, the U.S. Geological Survey detected alpha particle radioactivity in all 12 groundwater samples from six separate wells, with a median of 1.3 pCi/L and a range from 0.1 to 2.8 pCi/L. None of these measurements exceeded federal thresholds. These results are important as a regional reference, but they do not represent any single household’s water condition.

Commercial or industrial operators have additional questions to address, such as regulatory compliance, higher volume treatment needs, and occupational exposure limits. Households typically focus on water safety and aesthetic aspects, requiring a different approach when evaluating treatment options.

Influence of Sample Depth and Source Type on Uranium-Radium Expectations

The USGS samples were taken from wells between 11 and 100 feet deep, influencing detected radioactivity levels. Shallow wells might show lower or more variable concentrations, while deeper wells in the same aquifer can display different radioactivity profiles. The type of source—whether private well or public supply—also affects expectations. Single household wells in Greene County can vary considerably, so individual testing is essential for accurate assessment.

Separation of Plumbing Materials and Age from Source Water Testing

Water quality readings for uranium and radium pertain solely to the source water and its natural geological context. The material and age of household plumbing do not affect uranium or radium content measured in water samples but can influence other water characteristics. This distinction ensures that consideration of treatment focuses correctly on source water radioactivity without conflating it with plumbing-related issues.

Matching Treatment Capacity to Household Water Demand

When choosing treatment equipment, understanding daily water use is crucial. The C-Series Uranium & Radium System offers a grain capacity of 32,000, designed to handle the removal of uranium-radium at volumes typical for residential use. Household water demand varies, but this capacity supports prolonged operation before maintenance or media replacement is needed, helping users select equipment that aligns with their routine consumption.

How the C-Series Uranium & Radium System Works

The C-Series System targets the alpha particle-emitting uranium and radium through a specialized filtration media that effectively removes these constituents from the water. By reducing uranium and radium levels, it helps maintain water quality consistent with health guidelines. This technology ships ready to configure for residential application, providing a focused method to address naturally occurring radioactivity in groundwater.

The Essential Step to Confirm Your Water Condition

The only definitive way to know your household water’s uranium and radium levels is through testing your own well or tap water. A laboratory analysis measuring alpha particle radioactivity will provide information specific to your situation. Should those results approach or exceed regulatory standards, treatment options like the C-Series Uranium & Radium System become relevant. Until then, the regional data from Greene County’s aquifer samples serves as a general reference, not a substitute for personal water testing.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2020-08-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Alpha particle in the 112OTSH aquifer (Greene County): 12 results from 6 wells, median 1.3 pCi/L, range 0.1-2.8 pCi/L; none above any federal threshold