What 'Detected', 'Median' and 'Range' Mean in Livingston County Water Sampling
Livingston County’s aquifer 112SDGV has been sampled by the U.S. Geological Survey across eight wells ranging from 49 to 116 feet deep. All samples detected chloride, with median values around 80.55 mg/L and a range spanning from 14.9 mg/L to 474.0 mg/L. These figures represent measurements taken in this area between August 1 and August 15, 2016. It's important to understand that these values describe the general water quality of the aquifer, not the exact content of any single residential well.
The term 'detected' simply means that chloride was measurable in every sample. The 'median' indicates the middle value in the set, helping indicate a typical concentration across these wells. The 'range' shows variability from the lowest to the highest measured concentration. Because these numbers come from multiple wells at different depths, individual household water tests are required to know specific chloride levels for your home.
How the Autotrol System Addresses Chloride in Total Well Water
The Autotrol Total Well Chlorination System is designed to handle constituents commonly found in total well water, including chloride. While chloride itself is an aesthetic concern affecting taste and potential staining, it does not pose a health risk at typical concentrations. The Autotrol System conditions well water through processes that reduce the effects of chloride and other compounds that impact household water quality and appliance longevity.
This system offers a capacity of 32,000 grains, ensuring it can accommodate varying household demands in sizing for total well water treatment. By reducing the impact of constituents that affect water clarity, taste, and hardness, it helps maintain better water quality throughout residential plumbing.
Sample Size and Its Role in Interpreting Water Quality Data
The data for Livingston County is based on only eight wells sampled during a two-week period. While this provides a snapshot of aquifer 112SDGV, such a small sample size means there can be significant variation not captured by these figures alone. Localized conditions such as well depth, geology, and nearby land use can influence the water quality in any individual well beyond what regional monitoring shows.
Therefore, this regional data should be viewed as an informative reference rather than a definitive measure of your household well water. Testing your own water is the only way to confirm chloride levels and other constituent concentrations to properly size treatment equipment.
Plumbing Material and Age Impact on Water Quality
Water quality inside a home can be influenced by plumbing materials and the age of the system. Pipes made from different metals or plastics may affect taste and potentially interact with water chemistry, separate from source water conditions. Older plumbing can contribute to staining or metallic tastes even when source water constituents are within typical ranges.
When evaluating total well water treatment, it’s important to consider these factors alongside source water testing to fully understand what influences water appearance and taste at the tap.
Ordering Your Water Quality Checks from Simple to Specific
To accurately size total well water treatment, begin with simple checks such as visually inspecting plumbing and running water through fixtures for taste or staining issues. Following that, obtain laboratory water tests focused on chloride and other total water quality parameters relevant to your area and household use.
These steps provide essential information to determine how much treatment capacity you need. Understanding both your water source and internal plumbing helps ensure the chosen system effectively addresses your household's total well water conditions.
What Should Not Be Concluded From Livingston County Data Alone
The regional chloride data provides helpful context but should not be used to assume your individual well water quality. No matter the median or range reported for the aquifer, only a specific water test for your well can establish actual constituent levels. Detected chloride does not mean a violation or unsafe water, and aesthetic thresholds do not represent health-based limits.
Use area data as a guide to anticipate potential treatment needs, but confirm by test before sizing or purchasing a system. The Autotrol Total Well Chlorination System ships ready to configure for residential use, suitable for handling typical total well water conditions encountered in Livingston County.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2016-08-15. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 112SDGV aquifer (Livingston County): 8 results from 8 wells, median 80.55 mg/L, range 14.9-474.0 mg/L; 2 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.