Distinguishing Total Well Water from Often Confused Water Problems

Chloride's Role in Water Quality

In Colleton County's aquifer 111SANDD, chloride has been detected in all sampled wells, with concentrations ranging widely but mostly below the aesthetic threshold.

Aesthetic versus Health Concerns

One well sample exceeded the secondary standard for chloride, which relates only to taste and staining—not a safety or health concern.

Difference from Localized Contaminant Issues

Total well water issues here reflect broad aquifer characteristics, not specific contamination in an individual well.

Maintenance Rhythm for the C-Series Total Well Chlorination System

Periodic System Regeneration

The C-Series system has a grain capacity of 32,000 and regenerates based on water usage, which helps maintain treatment effectiveness.

Monitoring Salt Levels

Users should regularly check and replenish the salt supply that supports the system’s function.

Simple Water Quality Checks

Routine water testing remains important to confirm ongoing treatment performance.

Treated Water Differences at the Tap with the C-Series System

Reduction of Chloride-Related Effects

The system helps address taste and staining issues linked to higher chloride concentrations common in the area.

Maintaining Appliance Longevity

By reducing factors that contribute to staining and corrosivity, household fixtures can last longer with proper treatment.

Consistent Water Quality

The system provides a steady treatment process suited to the documented aquifer range of conditions.

Variations in Water Expectations by Sample and Well Characteristics

Sample Depth Range

The local data derive from wells 13 to 56 feet deep, representing shallow to moderate depths within the aquifer.

Variability Across Wells

Chloride concentrations vary significantly between wells, emphasizing the need for individual water testing.

Source Type Considerations

These figures do not cover surface waters or deeper geological formations, just the specified aquifer.

Sample Size and Data Limitations in Colleton County

Number of Wells Sampled

Data come from only six wells, which limits broad generalizations about the entire aquifer.

Sampling Period

The six samples were collected between mid-2018 and late 2019, offering a snapshot rather than ongoing monitoring.

Implications of Small Sample Set

These government data provide useful baseline context but cannot define conditions in an individual household’s well water.

What Not to Conclude from Area Data

Area-wide measurements do not reveal the exact chloride concentration or water quality in any single well.

Detecting chloride in all samples does not indicate that any one well fails health standards or requires treatment based solely on these figures.

Exceeding a secondary standard in one sample relates only to aesthetic factors and does not signal contamination or unsafe water.

To understand specific household water quality, direct laboratory testing of that water is essential before sizing and choosing treatment options.

The C-Series Total Well Chlorination System ships ready to configure and can be sized appropriately once the household water chemistry is known.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2019-11-14. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 111SANDD aquifer (Colleton County): 6 results from 6 wells, median 15.0 mg/L, range 9.89-504.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding