What You Should Write Down Before Asking Anyone for Treatment Advice
To understand your well water and explore treatment options effectively, start by noting your well's depth, the date and results of any recent water test you had performed, and the specific water issues you observe at home. Your own water test is critical because government sampling for aquifer 112OTSH in Butler County provides only aggregated data from multiple wells, not your individual water quality. Knowing these details ensures any treatment recommendation is matched to your household’s actual water conditions.
How Many Samples and Wells Stand Behind the Figures, and What a Small Sample Means
The United States Geological Survey sampled 15 water results from 12 separate wells in Butler County’s aquifer 112OTSH between November 2010 and November 2020. These wells ranged from 32 to 92 feet deep. Detectable iron was found in 9 out of these 15 samples with concentrations ranging from 5.0 to 3490.0 micrograms per liter, and the median value was 7.5 micrograms per liter. Although this dataset provides a general picture of groundwater in the area, it is limited and does not directly characterize any single household’s water quality or iron levels.
Why Aesthetic Secondary Standards Differ From Health-Based Limits, Applied to This Constituent
Iron in water is generally managed for aesthetic reasons—taste, color, and staining potential—rather than health risks at the levels detected here. None of the samples from aquifer 112OTSH exceeded federal health-based limits for iron, confirming no regulatory violation in this dataset. The recommended thresholds for controlling iron focus on household comfort and appliance upkeep, which differ substantially from health safety standards.
What ‘Detected,’ ‘Median’ and ‘Range’ Mean in the Sampling Record on This Page
'Detected' means an instrument measured iron at or above the reporting limit in 9 samples; it does not indicate a problem by itself. The 'median' of 7.5 micrograms per liter represents the middle value of all measurements, showing that half the samples had iron levels above and half below this point. The 'range' from 5.0 to 3490.0 micrograms per liter shows variability among wells sampled over ten years. None of this data can predict your own water but suggests that iron presence varies widely in the area.
What Changes for a Large Household, a Second Home, or a Seasonal Property
Different household sizes and usage patterns influence which treatment approach is best. A large household may require equipment with higher capacity or flow rates, while a second home or seasonal property might prioritize systems with low maintenance demands during periods of vacancy. Planning based on your specific water usage profile helps optimize performance and cost-effectiveness of treatment. The Fleck Total Well Chlorination System is designed with a capacity of 32000 grains and ships ready to configure for varied household needs.
In summary, Butler County's aquifer 112OTSH water data provides a moderate range of iron presence without health-based exceedances. Evaluating your own well’s water through testing is necessary before committing to a treatment path. Among options, the Fleck Total Well Chlorination System offers a documented solution suitable for diverse household sizes and water conditions.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2020-11-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112OTSH aquifer (Butler County): 15 results from 12 wells, median 7.5 ug/L, range 5.0-3490.0 ug/L; none above any federal threshold