Understanding Sulfur Levels in Citrus County's Aquifer 120UFAQ
Median and Range of Sulfide Concentrations in Local Wells
Government sampling by the U.S. Geological Survey measured sulfide, the main cause of sulfur smell, in eight wells across Citrus County within aquifer 120UFAQ. The median sulfide concentration was 0.065 mg/L, with sample values ranging from 0.05 to 0.11 mg/L. These results reflect typical conditions but do not indicate any well's specific concentration.
Depth of Wells Sampled for Regional Sulfide Data
Sampled wells ranged from 46 to 107 feet deep, representing typical residential well depths in the area. This helps understand where sulfur smell might originate within the local groundwater.
Key Information to Record Before Seeking Treatment Advice
Document Any Household Water Odor Observations
Note when the sulfur smell is strongest, such as in hot water or cold water, after periods of no use, or at all faucets. Understanding odor patterns helps determine if the source is from water supply or plumbing.
Identify Any Recent Changes Related to Sulfur Smell
Keep track of any new equipment or changes in water usage that might affect water chemistry or plumbing conditions contributing to odor.
Collect Any Water Test Results from Certified Laboratories
Obtaining a lab report measuring sulfide specifically in your water is essential to confirm the sulfur smell's cause and concentration in your household water.
Comparing Citrus County Data to Neighboring Areas Without Overreading
Recognize That Regional Data Reflects Broader Groundwater Trends
The area-wide sampling results represent multiple wells and do not apply directly to any individual household well. Variability across wells means your water could differ significantly.
Use Neighboring County Data as Context, Not a Direct Comparison
Some adjacent counties may show different sulfide levels due to geology or well depth changes. Use comparative data cautiously and focus on your own testing for household decisions.
Understanding Certified Laboratory Test Reports for Sulfide
What a Certified Sulfide Test Reports
Lab reports list measured sulfide values, often in mg/L, with notes on detection limits. These tests confirm whether sulfide is present and quantify its concentration in your water.
Interpreting Results Relative to Local Aquifer Sampling
Compare your lab results to regional median and range for perspective, but rely on your specific test to decide on treatment needs.
The Sample Size and Meaning Behind Citrus County's Sulfide Data
Number and Frequency of Samples
The U.S. Geological Survey collected 15 samples from 8 wells during 2011-2012. Though limited, this provides a snapshot of typical sulfide levels in the aquifer region.
Implications of Limited Sampling
Smaller sample numbers mean less statistical certainty about variations, so individual well testing is important to verify your household water's condition.
How the C-Series Rotten-Egg Sulfur Smell Filter Addresses Sulfide Odor
Technology Behind the Filter
The C-Series System uses specialized filtration media to remove or neutralize sulfide compounds, reducing sulfur smell originating from water before it reaches household taps.
Benefits for Homeowners with Sulfur Smell
This filter ships ready to configure for residential water systems and provides an effective solution to household sulfur odor consistent with local water quality conditions.
In summary, the U.S. Geological Survey's sampling in Citrus County's aquifer 120UFAQ captured sulfide concentrations from 8 wells at depths between 46 and 107 feet, with all results below federal thresholds. These figures offer context but cannot substitute for individual water testing to assess sulfur smell severity at home. For detailed data, please consult the government source: https://waterdata.usgs.gov/monitoring-location/284916082152401/.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2012-12-17. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Sulfide in the 120UFAQ aquifer (Citrus County): 15 results from 8 wells, median 0.065 mg/L, range 0.05-0.11 mg/L; none above any federal threshold