Flow restrictor, 700 ml/min capacity — FR-700-02, Flow Restr, T x T 700 ml/Min, 113033
Understanding 'Detected', 'Median', and 'Range' in Utah County Water Samples
The U.S. Geological Survey sampled 28 wells in Utah County's 100VLFL aquifer from July 2010 to June 2021 to measure water hardness components such as calcium and magnesium. 'Detected' means all 67 sampled results measured hardness minerals; 'median' indicates the middle hardness level found was 284.0 mg/L, while 'range' spans from 138.0 to 621.0 mg/L. These figures reflect area-wide data, not any single household's water.
How Sample Size and Variety Affect Confidence in These Figures
Data comes from 28 separate wells at depths from 90 to 700 feet, providing substantial coverage of the aquifer. A larger number of samples across depths gives a more reliable picture than fewer or shallower tests. However, household water can vary, so local testing is necessary to confirm individual water hardness.
Sources of Hardness Minerals in Utah County Groundwater
Calcium and magnesium dissolve naturally from underground rock formations into the groundwater over time. These minerals contribute to typical water 'hardness' and lead to spotting or filming on dishes and glassware when water evaporates. The minerals themselves are common in this region's aquifer and do not indicate contamination or health risk.
Effects of Well Depth and Water Source Type on Hardness Expectations
Deeper wells tend to draw from older groundwater which may have higher mineral content, though this can vary. Public water systems may blend sources and treat water differently before delivery. Your well water could differ from area medians, so water testing is the only way to know your household’s specific condition.
Interpreting the Aquifer’s Hardness Figures for Your Household
The median hardness of 284 mg/L in this aquifer suggests moderate to high mineral content, enough to cause spotting on dishes with standard equipment. The upper range reaching 621 mg/L indicates some wells have significantly harder water. If your existing dishwasher or water equipment struggles to provide spot-free dishes, minerals at these levels could be a factor.
How Your Water Changes with the C-Series Spotty Dishes & Glassware System
The C-Series System ships ready to configure and addresses mineral spotting by reducing the effects of dissolved calcium and magnesium at the tap. This technology helps households in Utah County overcome limitations of existing equipment that cannot keep up with local water hardness levels. After treatment, you can expect fewer mineral spots and clearer dishes without changing your water source or relying on guesswork.
This briefing outlined how Utah County’s 100VLFL aquifer data informs us about typical mineral presence that may challenge dish spotting. It also explained why testing your household water and using the C-Series Spotty Dishes & Glassware System offers a targeted path toward clearer, spot-free dishes.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2021-06-16. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 100VLFL aquifer (Utah County): 67 results from 28 wells, median 284.0 mg/L, range 138.0-621.0 mg/L; none above any federal threshold