Sensitive Skin Checklist for Washington County Water Sizing Using Aquifer 110SDMS Data

140 mesh inline filter screen for T-line filters — FS100-140, Fltr Screens, 140 Mesh For T-Line Fltrs, FS1-140

$33.66

140 mesh inline filter screen for T-line filters — FS100-140, Fltr Screens, 140 Mesh For T-Line Fltrs, FS1-140

View full details

✓ Free shipping in the USA  ·  ✓ 90-day returns  ·  ✓ Secure checkout

140 mesh inline filter screen for T-line filters — FS100-140, Fltr Screens, 140 Mesh For T-Line Fltrs, FS1-140

140 mesh inline filter screen for T-line filters — FS100-140, Fltr Screens, 140 Mesh For T-Line Fltrs, FS1-140

Buy Now

View full details

Washington County's water supply mainly comes from aquifer 110SDMS, feeding many wells between 39 and 140 feet deep. This underground source influences the mineral content experienced in household water. Knowing these details helps when sizing solutions for sensitive skin concerns.

Comparing Washington County's Record with Neighboring Counties Without Overreading

Focus on aquifer-specific data rather than county borders

Washington County's aquifer 110SDMS water quality is characterized by mineral content measurements reflecting the deep groundwater. Neighboring counties may draw from different aquifers with distinct mineral profiles. Comparing data is valid only if the aquifers are the same or geologically connected; otherwise, the data reflects different water systems and should not be conflated.

Use median and range figures, not single samples

Look at the median and range of measurements within the aquifer rather than isolated test results from neighboring areas. This avoids overinterpreting variations or assuming uniform water characteristics across regions.

Recognizing Seasonal or Multi-Year Variation in the Record

Data spans from mid-2010 to mid-2011

The available measurements for Washington County aquifer 110SDMS include three well samples collected over a one-year period. This timeframe offers a snapshot but may not represent long-term or seasonal changes.

Range shows natural variation in mineral levels

The measured constituent—comprising calcium and magnesium concentrations influencing skin sensitivity—ranged from 41.8 to 348.0 mg/L, illustrating variability among wells and times sampled. This variation suggests some natural fluctuation but does not specifically indicate seasonal patterns.

Interpreting the Measured Range Against Federal Standards

No federal safety thresholds exceeded in this data

All three tested wells showed calcium and magnesium levels below regulatory thresholds according to U.S. federal standards. This means the water meets safety criteria but does not guarantee suitability for sensitive skin without further evaluation.

Measured levels do not identify individual household water quality

Because these figures reflect area aquifer sampling, they do not determine mineral levels in a specific home's water. Individual well testing is necessary to confirm actual water characteristics.

Reading Certified Laboratory Test Results for Your Water

Focus on calcium and magnesium content related to skin sensitivity

To understand water impact on sensitive skin, request a certified lab test measuring calcium and magnesium concentrations. The report will provide precise figures for your water source.

Compare your test results to area medians and ranges cautiously

Use local aquifer data as a benchmark to place your results in context but recognize variability in wells and depths. Personal testing is the best guide for treatment decisions.

Example: How a Homeowner Reads Median and Range from the Record

Median value offers a central tendency

Washington County's aquifer 110SDMS has a median calcium-magnesium concentration of 97.0 mg/L. This number helps understand the typical water mineral level to expect in the area.

Range indicates possible higher or lower values

The range from 41.8 to 348.0 mg/L means some wells can have significantly softer or harder water. Homeowners should measure their water specifically to know where it falls.

Using this information to size equipment

Knowing these values, especially extremes, can guide selecting the capacity needed for sensitive skin water treatment systems. The C-Series Sensitive Skin & Eczema System ships ready to configure with a 32,000 grain capacity, suitable for varying mineral loads.

In summary, Washington County groundwater data from aquifer 110SDMS provides useful benchmarks to consider when addressing sensitive skin concerns in household water. Individual water testing is essential to confirm conditions, and sizing decisions benefit from understanding both median and range values documented here.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-07-27. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110SDMS aquifer (Washington County): 3 results from 3 wells, median 97.0 mg/L, range 41.8-348.0 mg/L; none above any federal threshold