If You Know How Calcium and Magnesium Enter Your Water Here
In Lake County, Indiana, calcium and magnesium naturally occur in groundwater from the surrounding geology, primarily limestone and dolomite formations. These minerals dissolve into aquifers like 110QRNR over time. This process is normal and contributes to the "hardness" of the water. For households with sensitive skin, the presence of calcium and magnesium at certain levels can contribute to dryness or irritation when bathing or washing.
If Your Well or Water Source Depth Differs From Regional Sampling Depths
The U.S. Geological Survey samples wells between 8 and 18 feet deep in this Lake County aquifer. Water from deeper or shallower sources may vary somewhat in calcium and magnesium levels. Understanding your own water requires a certified laboratory test specific to your well or supply. Regional data provides context but not precise information about your home’s water.
If You Have a Laboratory Test Reporting Mineral Concentrations
Lab results typically list calcium and magnesium concentrations in milligrams per liter (mg/L). For Lake County’s aquifer 110QRNR, government samples show a median total hardness of 268.5 mg/L, ranging from 133 to 417 mg/L across 22 measurements from 18 wells. These numbers represent typical regional values, not a household-specific reading. The results indicate minerals detected but do not indicate a violation of any health or safety standards.
If You Are Considering How Often to Care for a Water Treatment System
The Fleck Sensitive Skin & Eczema System, with a grain capacity of 32,000, is designed to adjust water mineral content in a way that can support sensitive skin needs. This equipment ships ready to configure and requires routine maintenance based on your household’s water use, roughly corresponding to how quickly it cycles through its grain capacity. Regular attention ensures consistent performance but does not require professional service visits.
If You Wonder What Regional Hardness Ranges Mean Compared to Federal Standards
The mineral concentrations detected in Lake County’s aquifer 110QRNR wells are all below federal thresholds related to health and safety. The federal government does not set limits on calcium and magnesium levels for drinking water because these minerals are not considered health hazards. Instead, these minerals influence aesthetic factors like water feel and potential skin irritation. Detection means the minerals are present; it does not mean the water is unsafe or legally non-compliant.
Final Consideration: To confirm your household water mineral profile, obtain a certified lab test focused on calcium and magnesium levels. When you have your results, you can rely on the Fleck Sensitive Skin & Eczema System as a documented solution calibrated to your demand. This system’s grain capacity of 32,000 provides a reliable approach to moderating minerals affecting sensitive skin in Lake County’s groundwater setting.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2021-06-22. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110QRNR aquifer (Lake County): 22 results from 18 wells, median 268.5 mg/L, range 133.0-417.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.