Water in Gwinnett County, Georgia, primarily comes from the deep aquifer 320CRSL, with groundwater drawn from depths between 280 and 600 feet. This water travels through natural geological layers before reaching household taps. Understanding the characteristics of this source water can help homeowners manage sensitive skin issues potentially related to their water supply.
What does a certified laboratory test report about water hardness for my area, and how should I interpret it?
Certified labs measuring groundwater in Gwinnett County from aquifer 320CRSL report concentrations of hardness constituents mainly calcium and magnesium. Data summarized by the U.S. Geological Survey from 13 samples between 2010 and 2013 show a median hardness value of 96.3 mg/L, with observed values ranging from 62.1 to 118.0 mg/L. These numbers represent detected levels of minerals that contribute to water hardness but do not indicate a violation of federal water standards. A lab test on your own household’s tap or well water is necessary to know your exact hardness levels since area sampling averages cannot specify individual water conditions.
What happens if hardness is not addressed over years in households with sensitive skin?
When hardness minerals remain untreated in water used for bathing or washing, some individuals with sensitive skin may experience irritation or dryness due to mineral residues altering soap effectiveness and leaving films on the skin. Over time, this can exacerbate skin sensitivity or eczema flare-ups. However, these effects vary by individual and water composition, and untreated hardness is not a health violation. Assessing your personal experience and water test results will clarify if treatment could benefit your skin’s comfort.
How do seasonal or multi-year variations appear in Gwinnett County’s water hardness records?
The U.S. Geological Survey’s collected data span a three-year period from mid-2010 to mid-2013, showing variation in hardness measurements ranging roughly from 62 to 118 mg/L. Such fluctuations reflect natural seasonal changes and different sample well depths rather than sudden or unusual shifts. This long-term record provides context for expected variability in mineral content but does not specify short-term trends or spot changes in household water hardness.
How can a Gwinnett County homeowner use the median and range values to understand their water hardness?
A median hardness of 96.3 mg/L means half the sampled measurements were below this value and half above, offering a midpoint estimate for typical water in this aquifer. The range from 62.1 to 118.0 mg/L shows the spread between the lowest and highest detected hardness during sampling. Homeowners can consider that their actual hardness may fall anywhere within this range or outside it, reinforcing that personal water testing is essential to determine the exact condition at their tap.
How does the Pentair Sensitive Skin & Eczema System address hardness-related skin concerns?
The Pentair Sensitive Skin & Eczema System is designed to treat water hardness components such as calcium and magnesium that can affect skin comfort. With a grain capacity of 32,000, this direct-purchase system ships ready to configure for residential settings. It works by reducing the concentration of hardness minerals, thereby improving water’s feel and reducing residue that may irritate sensitive skin. This treatment can complement existing equipment that struggles to keep up with household water demands.
In summary, Gwinnett County’s groundwater from aquifer 320CRSL shows median hardness values near 96 mg/L with natural variation based on sampling from 2010 to 2013. While these figures provide useful regional context, testing your specific water source is the only way to confirm your water’s characteristics. The U.S. Geological Survey remains the authoritative source for this data and ongoing water quality monitoring.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-06-18. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 320CRSL aquifer (Gwinnett County): 13 results from 9 wells, median 96.3 mg/L, range 62.1-118.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.