Sensitive Skin Concerns in Pottawatomie County Water: Understanding Area Hardness Levels

30 Fiberglass Tanks - Twin Unit Skid

Buy Now

View full details

If Your Water Test Report Lists Hardness Levels, Here's What It Means

Water hardness measures minerals like calcium and magnesium dissolved in water. Commercial operators concerned about sensitive skin often look to hardness as a key factor because elevated hardness levels can contribute to skin irritation in some individuals. In Pottawatomie County, according to U.S. Geological Survey groundwater sampling of aquifer 317GBWG, six wells sampled between 2011 and 2013 showed hardness values ranging from 25.8 to 190.0 milligrams per liter (mg/L), with a median of 76.5 mg/L.

If Your Concern Is Legal Standards for Hardness, Here’s What the Range Does and Does Not Indicate

None of the sampled hardness results from this aquifer exceeded federal thresholds because water hardness does not have a federally enforceable safety limit. Rather, hardness levels mostly affect aesthetics and personal comfort, such as soap efficiency and potential skin dryness or irritation. Detected hardness in this area does not indicate an unsafe condition but provides contextual data for commercial water treatment decisions related to sensitive skin.

If You See Terms Like Detected, Median, and Range in the Report, Understand What They Represent

“Detected” means the instruments found measurable hardness in all tested wells; “median” is the middle value among the six results, reflecting typical water hardness in the area; and “range” shows the spread from the softest to the hardest sampled wells. These six samples, taken from depths of 110 to 200 feet, capture variability over multiple locations and time points but do not reflect any single well’s condition.

If You Plan to Treat an Entire Building, Here Is What You Should Note Before Any Decision

• Obtain a laboratory hardness test specific to your building’s water source to confirm conditions.
• Note fluctuations in water quality throughout the year, as the historical data show samples collected over multiple years.
• Record total dissolved solids and other mineral levels, which can interplay with hardness effects on skin.
• Consider the volume and flow rates required for whole-building treatment.

If You Use the 30 Fiberglass Tanks - Twin Unit Skid, Here’s How Water Treatment Addresses Sensitive Skin Needs

This commercial system skid is designed to treat water for an entire building efficiently. It conditions water by managing minerals related to hardness, which can reduce skin irritation factors by delivering more balanced water. The technology ships ready to configure to your plumbing system, providing scalable treatment capacity that adjusts to your building’s size and water demand.

If You Wonder How Reliable the Data Are, Here’s What the Sampling Numbers Mean for You

The USGS sampling included six wells, a modest sample size but enough to offer a snapshot of the aquifer's hardness characteristics across Pottawatomie County. While informative, these samples do not capture every variation or seasonal change fully. Water quality in your building may differ, emphasizing the need for your specific water test.

Final Step: Order a Water Hardness Test for Your Building's Source

The most definitive action to address sensitive skin in your commercial operation is to analyze your own water supply. A hardness test with professional lab analysis will confirm your water’s mineral content. A result in the moderate range or above can guide selecting and configuring comprehensive whole-building treatment like the 30 Fiberglass Tanks - Twin Unit Skid to meet your sensitive skin care requirements effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2013-03-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 317GBWG aquifer (Pottawatomie County): 6 results from 6 wells, median 76.5 mg/L, range 25.8-190.0 mg/L; none above any federal threshold