Autotrol Sediment From the Well Pump Filter

Buy Now

View full details

Recognizing Household Symptoms Linked to Well Pump Sediment

Visible Sediment in Faucets or Showerheads

Fine particles or sand appearing in water outlets often signal the presence of sediment being drawn from a well pump.

Unusual Wear on Water-Using Appliances

Increased abrasion or deposits inside appliances like dishwashers or washing machines may indicate sediment accumulation.

Reduced Water Flow or Pressure Fluctuations

Clogging caused by sediment buildup can cause changes in water delivery performance.

Symptoms Not Necessarily Related to Sediment

Discolored water or strong odors often have different causes and should not be assumed as evidence of sediment issues.

Understanding the Extent of Local Groundwater Sampling

Number of Wells Sampled in Kankakee County

Seven separate wells were sampled within aquifer 110QRNR between mid-2011 and mid-2021 to gather water quality data.

Frequency and Range of Sampling Events

A total of 28 samples were collected, representing multiple points in time over a decade.

Depth of Sampled Wells

The wells ranged from 12 to 23 feet deep, reflecting shallow groundwater conditions common in the county.

Implications of a Limited Sample Set

The relatively small number of wells and samples means local conditions may vary, and individual well testing remains important.

Interpreting Key Terms from the Groundwater Record

Meaning of 'Detected' in the Data

The constituent specific conductance was measured in every sample, indicating its presence but not necessarily a problem.

Understanding 'Median' Values

The median specific conductance was 448 microsiemens per centimeter, representing the middle value among the detections.

Significance of the 'Range' in Measurements

Results varied from 33 to 744 microsiemens per centimeter, reflecting natural fluctuations in water quality over time and locations.

Limits and Safety Considerations

No samples in this set exceeded federal thresholds. The data do not imply contamination or unsafe water.

Steps to Confirm Your Home’s Water Condition

Perform a Visual Inspection of Water Outlets

Look for particles or coloration that might suggest sediment presence.

Monitor Appliance Performance for Signs of Sediment

Note any unusual wear or maintenance issues that could be sediment-related.

Obtain a Certified Laboratory Test

Professional testing is needed to determine specific conductance and sediment levels in your well or tap water.

Consider Using a Sediment Filter System

Once sediment presence is confirmed, solutions like the Autotrol Sediment From the Well Pump Filter, which ships ready to configure, can help address the problem effectively.

Fixtures and Appliances Most Affected by Sediment

First Signs in Faucets and Showerheads

These points often show sediment issues earliest through clogging or visible particles.

Impact on Water-Using Appliances

Devices like water heaters, dishwashers, and washing machines may experience sediment-related wear or reduced efficiency.

Potential Effects on Plumbing Components

Pipes and valves can accumulate sediment over time, leading to maintenance concerns.

What Kankakee County Water Data Does Not Specify

The local groundwater record cannot establish the condition of your individual well or tap water. Specific conductance variations and sediment presence vary by location and depth. Testing your own water is essential to make informed choices about addressing well pump sediment.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-06-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Specific conductance in the 110QRNR aquifer (Kankakee County): 28 results from 7 wells, median 448.0 uS/cm, range 33.0-744.0 uS/cm; none above any federal threshold