Radon Levels in Sussex County Water: Understanding Local Groundwater Data for Homeowners
$3,950.00
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
Understanding Area Radon Data: What the Median and Range Show
Government groundwater testing in Sussex County's aquifer 121BVDM reported radon-222 in samples taken from two wells at depths between 13 and 22 feet. The recorded radon concentrations ranged from 233.0 to 350.0 picocuries per liter (pCi/L), with a median of 235.0 pCi/L based on three sample results collected between July 2012 and August 2014. These figures reflect the concentrations measured in this specific area and aquifer but do not provide a precise value for your household water supply.
As a homeowner, you can think of the median as the middle radon level measured among the samples — in this case, 235.0 pCi/L — while the range shows the lowest and highest readings found nearby. This range indicates some natural variability across wells even within the same aquifer. However, the testing does not tell you the exact radon level in your own well or tap water without a direct test. The data simply offers a regional perspective on possible radon presence.
Seasonal and Multi-Year Trends Reflected in Sussex County Data
The radon sampling occurred over a two-year period, with the earliest sample in July 2012 and the latest in August 2014. Despite this span, the data shows radon levels consistently detected within a relatively narrow interval, from 233.0 to 350.0 pCi/L. Such consistency suggests that substantial seasonal or year-to-year fluctuations were not evident in these samples from this part of Sussex County during that timeframe.
Still, individual water sources can experience variations in radon concentration depending on factors like groundwater flows, temperature, and well depth. This means your well water’s radon level could differ from this regional snapshot and may shift slightly over time.
How Radon Enters Groundwater in Sussex County’s Aquifer
Radon-222 is a naturally occurring radioactive gas formed from the decay of uranium in rocks and soil. In Sussex County’s aquifer 121BVDM, radon can dissolve into groundwater as it moves through underground formations. Because radon is a gas, it may be present in water drawn from wells, especially shallow ones like those sampled at depths of 13 to 22 feet.
Once radon enters the water, it can be released into indoor air during household uses such as showering or dishwashing, which is a primary concern for health. Understanding how radon moves from rock to water helps explain why it is detected consistently across this aquifer.
How Fleck Radon in Water Filter Addresses Radon in Household Water
To reduce radon levels in household water, a treatment system that targets the gas specifically is needed. The Fleck Radon in Water Filter employs technology designed to effectively remove or neutralize radon before water reaches your taps. This system ships ready to configure with your home’s water line and can help lower radon concentrations based on the levels you confirm through testing your well or tap water.
Differences Between Public System Records and Private Well Testing
Public water system records generally do not include radon data because radon in water is not currently regulated under federal standards for municipal supplies. The Sussex County data discussed here comes from private or monitoring wells representative of the aquifer but does not apply to public water systems.
For homeowners relying on private wells, this makes direct testing of your own water essential to determine radon levels and the need for treatment. Area sampling offers useful context but cannot replace laboratory analysis of your household supply.
Why Aesthetic Secondary Standards Are Distinct from Health-Based Limits for Radon
Radon does not have a federally enforceable maximum contaminant level for water. The detections in Sussex County are below any federal action levels that might exist for other contaminants. It is important to understand that aesthetic secondary standards for water quality—those concerning taste, odor, or staining—do not apply to radon, which is primarily a health-based concern when airborne.
This distinction highlights why knowing your own water’s radon concentration through testing is critical: it helps you assess health risks and decide if treatment is appropriate, rather than relying solely on regional data or aesthetic benchmarks.
Final Steps: Testing Your Water and Considering Treatment
If you have measured radon in your household water or have concern based on regional data, the next step is to test your own well or tap water with a qualified laboratory. Knowing your specific radon concentration will guide the appropriate use of filtration technology like the Fleck Radon in Water Filter.
This documented solution is designed to reduce radon in residential water supplies and ships ready to configure, making it a practical choice when testing shows elevated levels. Understanding both area data and your own water’s radon content enables you to make informed decisions for your household’s water quality and safety.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2014-08-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 121BVDM aquifer (Sussex County): 3 results from 2 wells, median 235.0 pCi/L, range 233.0-350.0 pCi/L; none above any federal threshold