Kit Carson County’s Aquifer and Residential Water Delivery
Water for many homes in Kit Carson County is drawn from aquifer 121OGLL, featuring wells reaching depths between roughly 141 and 245 feet. Groundwater rises from this aquifer through private wells or community systems, carrying elements naturally present underground, including radon-222. Understanding these elements in the water supply is important for households, especially when existing water treatment equipment designed to address radon has ceased functioning properly.
Signs in the Household That May or May Not Indicate Radon in Water
Radon is a radioactive gas that can dissolve into well water from the rock and soil surrounding the aquifer. If radon enters your home primarily through water in your plumbing, you might notice occasional metallic or earthy water taste or odor changes, although these are not reliable indicators. Radon itself is odorless and invisible, so common water quality symptoms like cloudiness, staining, or unusual tastes typically do not relate to radon levels. If your existing radon-targeted water equipment has failed, you might simply notice an absence of previous treatments rather than new apparent water symptoms.
Analyzing Seasonal and Multi-Year Changes in Radon Within Kit Carson County
The U.S. Geological Survey collected radon samples from four separate wells in the area between March 2010 and August 2015. These measurements show radon-222 present in every sample with a median concentration of 267.5 picocuries per liter (pCi/L) and a range from 51.0 to 550.0 pCi/L. While these results indicate radon consistently occurs at measurable levels in the aquifer, the concentrations varied over the five-year period and across different well sites. Such fluctuations can result from seasonal changes in groundwater flow or geological conditions but do not necessarily imply increases or decreases within any single household’s water supply.
Comparing Radon Data From Kit Carson County to Neighboring Areas
When viewing radon results from Kit Carson County, it is useful to note that these figures reflect a specific aquifer and area wells, not the entire county or adjacent counties. Neighboring counties may have different geological formations affecting radon levels in groundwater. Therefore, comparing these local USGS data directly with other counties can help understand relative radon presence regionally but should not be assumed to predict your own water’s radon content. Each well’s depth, location, and local geology strongly influence radon concentrations.
Understanding the Terminology in Radon Sampling Reports
In the recorded USGS data, the term 'detected' indicates radon-222 was measurable in all four samples, never falling below the reporting limit. 'Median' is the middle value of the four measurements, representing a typical concentration level in the sampled subset. 'Range' spans from the lowest to the highest recorded levels among wells tested. Importantly, none of these readings exceeded any federal regulatory thresholds. These terms inform you about the distribution of radon in the aquifer samples but do not translate directly to the water in your household taps.
What a Certified Laboratory Radon Test for Your Well Water Reports
If you want to know the radon concentration in your own water supply, a certified laboratory test is required. Such tests provide specific radon measurements expressed in picocuries per liter (pCi/L), along with detailed information about sample collection and handling procedure. The report will list your well's radon levels, which can then be compared with local aquifer data and federal guidelines. This individual testing is the only way to determine your household’s radon situation definitively.
How Water Changes with Fleck Radon in Water Filter Treatment
After deciding to address radon detected in well water, using a technology designed specifically for radon reduction is key. The Fleck Radon in Water Filter ships ready to configure for home use. It employs a process effective in lowering radon concentrations before water reaches your taps, helping to restore household water quality and peace of mind after equipment failure. Once in operation, treated water shows significantly reduced radon levels compared to untreated supplies, although exact results depend on your individual water test outcomes.
When your existing radon-targeted water treatment equipment no longer functions, understanding local radon measurements and confirming your own well’s radon via certified lab testing are critical next steps. The Fleck Radon in Water Filter provides a documented, reliable method to reduce radon in your household water supply based on your measured demand.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-08-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 121OGLL aquifer (Kit Carson County): 4 results from 4 wells, median 267.5 pCi/L, range 51.0-550.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.