If You See a Sudden Change in Water Quality or Equipment Behavior
When your radon treatment equipment stops working properly, you might notice differences at your taps or fixtures such as changes in water taste, smell, or unexpected deposits. These signs point to potential issues in your water supply's radon content, but they don't specify your water's current radon levels. To understand what might be happening, it helps to know what federal groundwater sampling found in your area’s aquifer.
If You're Reviewing the Median and Range of Radon Levels Recorded Regionally
The U.S. Geological Survey measured radon-222 concentrations in Elko County’s N100BSNRGB aquifer, sampling three wells between September 10 and 19, 2013. These wells ranged from 347 to 654 feet deep. The results showed radon detections in all three samples, with a median level of 620 picocuries per liter and a range from 238 to 1,110 pCi/L. While these figures demonstrate radon presence in the aquifer water generally, notable variability exists across sampled locations and depths.
If You Wonder What These Radon Levels Mean Compared to Federal Standards
No sample in the USGS data exceeded any federal standard for radon in water. It’s important to understand that detection does not imply a violation or an unsafe condition by itself. Federal agencies have set benchmarks to guide water safety, but radon in groundwater is naturally occurring and its presence varies. To determine whether your household water is within acceptable ranges or requires treatment, testing your own water is essential, since regional data cannot specify your well's actual radon concentration.
If You Consider Whether This Radon Issue Could Be Confused with Other Water Problems
Radon concerns are often mixed up with problems caused by other substances such as naturally high levels of total dissolved solids or changes in water hardness. Unlike these, radon is a radioactive gas that can enter water through natural decay of uranium in underground rock formations. Taste or staining changes more commonly relate to mineral content rather than radon itself. Confirming radon presence is key before pursuing radon-specific treatment.
If You Know Your Plumbing’s Age and Material Could Affect Your Water Experience
The materials and age of your household plumbing system influence water quality independently of source water radon levels. Older pipes or certain metals can contribute to corrosion or undesirable water taste and appearance, sometimes masking or mimicking effects attributed to radon. Therefore, inspecting plumbing conditions alongside water testing helps clarify the actual cause behind any water changes.
For household water with a verified radon level in this range, the Autotrol Radon in Water Filter ships ready to configure for on-premise use to reduce radon concentration as measured in your own water testing. Choosing treatment based on your individual test results ensures addressing your water’s specific needs, especially following failure of existing radon equipment.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-09-19. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the N100BSNRGB aquifer (Elko County): 3 results from 3 wells, median 620.0 pCi/L, range 238.0-1110.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.