Water drawn from aquifer 371ELBK in Cumberland County, PA, comes from wells reaching depths between 129 and 225 feet, providing water that naturally contains varying levels of radon-222. According to U.S. Geological Survey groundwater sampling done in 2015, radon was detected in all four sampled wells, with concentrations ranging from 300 to 630 pCi/L and a median value of 515 pCi/L. None of these measurements exceeded federal thresholds.
Household Symptoms Indicative of Radon in Water
Visible signs that suggest radon presence
- Unusual gas odors in water or air, sometimes described as earthy or musty, especially when water is heated
- Persistent accumulation of gas in indoor air after water use
- Increased frequency of water-related respiratory symptoms, such as coughing
Household issues unlikely caused by radon-222
- Cloudy or colored water, as radon is a gas and invisible
- Sudden changes in water taste unrelated to chemical additives
- Visible water stains or scaling, which usually relate to minerals rather than radon
How the Fleck Radon in Water Filter Treats Radon
Principle of radon reduction
This system uses a filtering process designed to remove radon gas from water before it reaches household taps. Radon, being a radioactive gas, is effectively separated from water molecules and vented safely away, reducing the radon level in the delivered water.
System readiness
The Fleck Radon in Water Filter ships ready to configure, allowing households to integrate it with existing water systems to maintain safe water quality under increasing radon loads.
Influence of Well Depth and Source Type on Radon Concentration Expectation
Variations related to well depth
- Deeper wells often intersect geological formations with higher radon generation
- Shallower wells may have lower radon but other variable gas concentrations
Source type considerations
- Groundwater from aquifers such as 371ELBK characteristically carries measurable radon due to natural uranium decay
- Surface water sources usually have negligible radon compared to groundwater
Stepwise Approach to Confirm Radon and Assess Treatment Needs
1. Review household equipment performance
Confirm if existing radon mitigation equipment is managing radon levels adequately or showing signs of overload, such as recurring odors or increased radon detection in air.
2. Simple physical checks
Inspect for unusually persistent gas odors after water use or factors that might impede venting or filtration.
3. Laboratory water testing
Order a comprehensive radon-in-water test from a certified laboratory to establish your household’s current water radon concentration, as regional data do not specify individual water results.
Essential Information to Document Before Seeking Treatment Advice
- Depth and type of your household water well
- Age and specifications of current radon treatment equipment
- Recent water test results for radon and other constituents
- Observed changes in water or indoor air quality over time
What to Expect After Incorporating the Fleck Radon in Water Filter
- Reduction in radon concentration in water reaching taps, enhancing household safety
- Reduced radon gas release in indoor air related to water use
- Maintenance of water taste and clarity without added chemicals
This page has reviewed the typical radon levels found in Cumberland County’s aquifer 371ELBK, symptoms households may observe, and the role of a dedicated radon treatment system designed to support these conditions. Testing your own water is essential to defining the real need and verifying treatment effectiveness.
The Fleck Radon in Water Filter provides a documented solution to manage radon content in household water, especially when existing equipment no longer meets demand.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-07-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 371ELBK aquifer (Cumberland County): 4 results from 4 wells, median 515.0 pCi/L, range 300.0-630.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.

