Radon Levels in Cumberland County Water: What Area Sampling Reveals for Your Household
$3,950.00
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
Range and Quantity of Radon Samples in Cumberland County Aquifer 121CKKD
The U.S. Geological Survey collected radon-222 data from 24 wells in Cumberland County's aquifer 121CKKD between September 2022 and August 2024. In total, 39 sample results were reported. These wells varied in depth from 11 to 171 feet. Radon was detected in every one of these samples, with concentrations ranging widely from 36.0 to 3900.0 picocuries per liter (pCi/L). The median value across all samples was 189.0 pCi/L.
While these figures provide a broad picture of radon presence in this area’s groundwater, they do not specify the radon concentration in any one private well. Individual household water sources can vary significantly from the regional data due to factors such as well depth, local geology, and construction.
How Radon Levels May Differ for Large, Seasonal, or Secondary Residences
Households with a larger water demand or those that are used part-time can experience differing radon exposure scenarios. Increased water usage in large households may lead to more frequent water turnover, potentially influencing indoor radon release from water. Seasonal or second homes might experience changes in radon concentration due to variations in groundwater levels or temperature during periods of non-use.
These factors mean that the radon levels relevant to your property could diverge from the regional figures, emphasizing the need for property-specific testing.
Additional Considerations for Commercial or Industrial Water Users
For users beyond household needs—such as businesses or small manufacturers—radon in water may pose specific challenges. Processes involving water aeration or heating can increase radon release into indoor air, potentially raising exposure beyond that from water consumption alone.
Commercial water users should evaluate radon risks in the context of their operational water volume and how water is used within their facilities, recognizing that their exposure profile can differ markedly from that of residential settings.
Understanding Your Laboratory Radon Test Report
A certified laboratory test performed on your own water sample will report radon concentrations typically in picocuries per liter. This precise measurement reflects radon levels in your specific water source, distinct from area-wide data.
The laboratory report will enable you to assess radon presence accurately. It is important to understand that detection of radon itself is not a violation or proof of unsafe water. Instead, the test offers the critical information needed to decide if treatment is desired based on your household’s tolerance and any applicable guidelines.
Which Household Fixtures and Appliances Are Most Affected by Radon in Water
Radon enters indoor air primarily when water is used in ways that promote aeration. Common household fixtures such as showers, bathtubs, and faucets are key points where radon may transfer from water to air. Water softeners, dishwashers, and washing machines typically have less impact on airborne radon but still represent pathways for exposure.
Knowing which fixtures contribute most to radon release can help prioritize testing and treatment decisions within the home environment.
The Autotrol Radon in Water Filter provides a documented method to reduce radon levels in household water supplies. This system ships ready to configure and uses an established technology to lower radon concentrations based on the specific level detected in your water. Using your laboratory test results as a guide ensures that treatment is matched to your household’s needs.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-08-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 121CKKD aquifer (Cumberland County): 39 results from 24 wells, median 189.0 pCi/L, range 36.0-3900.0 pCi/L; none above any federal threshold