Radon in Calhoun County Water: Understanding Range and Treatment Capacity
If you notice an unusual taste or odor in your tap water or are concerned about radon gas entering your home through water, understanding what your water test report shows can help you make informed decisions. In Calhoun County, Arkansas, wells drawing from aquifer 124SPRT have been sampled for radon-222, a radioactive gas that can dissolve into groundwater.
What a Certified Laboratory Radon Test Report Shows and How to Read It
Certified labs report radon levels in picocuries per liter (pCi/L). For Calhoun County's aquifer 124SPRT, three samples from two wells taken between 2012 and 2014 showed radon-222 results ranging from 51.0 to 216.0 pCi/L, with a median of 68.0 pCi/L. These results indicate detectable radon everywhere tested, but none exceeded federal standards. A lab report for your water will display your own measured radon concentration, which can only be confirmed through a test of your well or tap.
Sequencing Checks: From the Least Costly to a Laboratory Test
Before investing in any treatment, start with basic checks:
- Verify plumbing integrity and check for sources of contamination unrelated to radon.
- Review local water quality reports for regional context.
- If concerns persist, obtain a certified lab radon test specific to your water source.
This approach ensures that you target radon specifically and avoid unnecessary expenses.
Interpreting Calhoun County Radon Levels Relative to Federal Standards—and What This Data Does Not Show
The reported radon concentrations in Calhoun County wells fall within a range that is considered detectable but remain below federal action levels. Detectable radon does not equal a safety violation or guarantee an issue in any individual household. Those levels represent a regional snapshot from wells deep between 320 and 613 feet, not a specific household’s water.
Understanding this distinction is important to avoid assuming your water matches these values. Only a test of your water reveals your actual radon level.
Matching Treatment Capacity to Your Household’s Daily Water Demand
When considering radon treatment, it is essential to evaluate how much water your household uses daily. Equipment like the Fleck Radon in Water Filter ships ready to configure and must be sized to handle your peak and average water demands efficiently.
Choosing a treatment system with capacity aligned to your household ensures effective radon reduction without compromising water flow or requiring frequent maintenance.
Household Symptoms That May or May Not Indicate Radon in Water
Radon in water is invisible and tasteless, so symptoms like unusual odors or colors usually relate to other water quality issues. No direct, acute symptoms in household members can be reliably attributed to radon dissolved in water. Concerns about radon primarily focus on long-term exposure risk via inhalation when radon escapes water during showering or cooking.
Monitoring your water quality and air radon levels, along with consulting certified labs, provides a more complete risk picture.
This information reflects radon measurements from groundwater wells sampled in Calhoun County’s aquifer 124SPRT by the U.S. Geological Survey between 2012 and 2014. For detailed data, visit the USGS water data site listed under groundwater monitoring location 334657092260301.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2014-08-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 124SPRT aquifer (Calhoun County): 3 results from 2 wells, median 68.0 pCi/L, range 51.0-216.0 pCi/L; none above any federal threshold

