Autotrol Perchlorate Filter

Buy Now

View full details

A laboratory test report for water typically lists the measured perchlorate concentration in micrograms per liter (µg/L). For residents served by the United Water Rhode Island system in South Kingstown, Washington County, EPA monitoring data from 2001-2005 shows no perchlorate detected above the reporting level of 4.0 µg/L. This is a federal occurrence survey covering the public system, not individual homes. Actual household levels require specific well or tap testing.

If You Want to Know How Treatment Reduces Perchlorate

The documented technology to address perchlorate in household water is the Autotrol Perchlorate Filter. It is designed to reduce perchlorate concentrations by using a selective filtration process that removes perchlorate ions from water. This technology works by exchanging perchlorate with other ions within the system, effectively lowering perchlorate levels before water reaches home fixtures.

If You Notice Which Fixtures or Uses Are Impacted First

Perchlorate presence primarily affects drinking and cooking water as these uses involve direct ingestion. Appliances such as ice makers, coffee machines, and drinking fountains are influenced immediately since they rely on tap water quality. Showers and laundry see less direct impact from perchlorate because it is mostly a concern related to ingestion rather than skin contact or fabric cleanliness.

If You Need to Assess Daily Water Demand Against Treatment Capacity

To ensure the treatment system functions well, compare your household’s daily water use with the filter’s capacity. Measuring average daily water consumption by adding typical uses—drinking, cooking, beverage making, and other tap uses—helps determine if a single Autotrol Perchlorate Filter meets your demand. Larger households or homes with high water use may require more frequent maintenance or additional units to maintain effective perchlorate reduction.

If You Want to Understand Terms Like 'Detected,' 'Median,' and 'Range' in Local Sampling Data

In the EPA’s UCMR1 monitoring data for South Kingstown’s system, 'detected' means an instrument measured perchlorate at or above 4.0 µg/L, the reporting level. 'Median' is the middle value of all measurements taken, and 'range' is the spread from the lowest to highest detected levels. Here, all 18 perchlorate results were below the 4.0 µg/L threshold, so no perchlorate was reported as detected. This indicates a generally low or undetectable presence in the system’s groundwater source during sampling.

If You Want to Know What the Measured Range Means Compared to Federal Standards

Currently, there is no federal maximum contaminant level (MCL) for perchlorate in drinking water. The EPA’s monitoring data indicates no perchlorate concentration above the detection limit for the South Kingstown public system. This absence of detected perchlorate does not imply any safety violation or contamination issue for the system overall. It also means any perchlorate found in home testing would require evaluation independent of these public system results.

For households with existing treatment equipment that has failed or is inadequate to address perchlorate concerns, choosing a capable system matters. The Autotrol Perchlorate Filter ships ready to configure for residential water treatment and can handle perchlorate reduction aligned with your measured daily water use. Testing your water thoroughly to establish perchlorate levels will help in selecting the appropriate capacity and ensuring effective treatment for your household’s needs.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2004-01-30. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR1 monitoring (2001-2005) for UNITED WATER RHODE ISLAND (RI1615624), RI: 18 results across 1 listed contaminants, 0 detections above the reporting level; nothing detected above the method reporting level