Nitrate in Coahoma County Groundwater: Understanding Local Levels and Treatment Options

WSP Whole House Nitrate Reduction System - Well Water, Nitrite Removal

Buy Now

View full details

Government groundwater sampling in Coahoma County's aquifer 112MRVA found nitrate detected in part of the area, with values from 0.038 to 0.228 mg/L and a median of 0.1105 mg/L across 16 samples from two wells.

Why do aesthetic secondary standards for nitrate differ from health-based limits?

Aesthetic secondary standards address qualities like taste, smell, or staining that affect water use comfort but do not indicate health risk. Health-based limits for nitrate are set higher to protect against health concerns such as methemoglobinemia, especially in infants. The nitrate measurements reported here are well below any federal health-based limits, showing no health risk based on these samples, though these aesthetic considerations can still influence water quality perception.

How does nitrate usually enter groundwater or water systems in Coahoma County?

Nitrate commonly originates from agricultural fertilizers, animal waste, septic systems, and natural soil processes. In Coahoma County's shallow wells ranging from 3 to 22 feet deep, nitrate can leach from surface activities into the groundwater. The area’s land use practices and geological features affect nitrate presence and variability in the aquifer.

What changes if the water supply serves a large household, a second home, or a seasonal property?

Water demand and usage patterns influence the volume of water drawn and treatment needs. Larger households may require treatment systems capable of handling greater flow rates and nitrate load. Seasonal properties might see different water quality fluctuations or usage intervals, impacting treatment timing and system design goals.

What do the terms ‘detected,’ ‘median,’ and ‘range’ mean in government nitrate sampling?

“Detected” means nitrate was measurable above the reporting threshold but does not imply a violation or unsafe condition. Here, nitrate was detected in 4 out of 16 samples and below reporting limits in the rest. The “median” is the middle value of all measurements (0.1105 mg/L), giving a sense of typical concentration. The “range” (0.038 to 0.228 mg/L) shows the variation between lowest and highest detected levels in the samples.

What does a certified laboratory test report for nitrate in home water, and how should it be read?

A certified lab test measures nitrate concentration in mg/L or ppm and includes a detection limit. Results below the lab’s reporting limit indicate nitrate was not detected at a measurable level. Tests above that limit show the specific concentration. Interpreting results requires comparing them to federal nitrate limits and considering that local sampling data provides context but does not define individual well conditions.

How does the C-Series Nitrate & Nitrite (Well) Filter treat nitrate in household water?

This filter system is designed to reduce nitrate and nitrite levels through proven filtration methods suitable for private well water. It ships ready to configure for household water supplies and can help lower nitrate concentrations to enhance water quality and meet treatment goals.

The key action for household water users concerned about nitrate is to obtain a certified laboratory test specific to their well water. A test result showing nitrate levels near or above federal health guidelines would indicate the benefit of using a targeted treatment system like the C-Series Nitrate & Nitrite (Well) Filter to reduce nitrate in the water supply.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-08-02. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nitrate in the 112MRVA aquifer (Coahoma County): 16 results from 2 wells, median 0.1105 mg/L, range 0.038-0.228 mg/L; none above any federal threshold