WSP Whole House Nitrate Reduction System - Well Water, Nitrite Removal

Buy Now

View full details

If you notice changes in your household water quality after your equipment stopped working, especially related to nitrate, understanding the local groundwater data can guide your next steps.

If your household is large, a second home, or used seasonally, what should you consider about nitrate?

Larger households or properties with intermittent use often have different water demand patterns. This impacts how any treatment system manages nitrate since more water usage means faster saturation and regeneration needs. Seasonal homes might experience water quality changes during long periods of non-use, affecting nitrate levels and treatment effectiveness when water is first drawn again.

If you are wondering how nitrate gets into Bernalillo County groundwater and water systems, what is the source?

The U.S. Geological Survey groundwater sampling in aquifer 112SNTFU shows nitrate detections in about half of sampled results, with a median concentration of 0.7365 mg/L and a range from 0.042 to 8.28 mg/L. These samples come from depths between 100 and 1630 feet across 16 wells sampled from mid-2013 to early 2020. In this area, nitrate primarily originates from natural soil processes and human activities such as fertilizer use and septic systems that can leach nitrogen compounds into groundwater over time.

If you need to address nitrate buildup after treatment failure, how does the Fleck Nitrate & Nitrite (Well) Filter work?

This system uses specialized filtration media to reduce nitrate and nitrite levels by ion exchange, effectively removing these compounds from well water before they reach household taps. The Fleck System ships ready to configure and can support households depending on their usage rates, restoring water quality affected by nitrate. The system's design also accommodates replacement or regeneration cycles based on water demand and nitrate loading.

If you look at the terms 'detected,' 'median,' and 'range' in the nitrate sampling record, what do they mean?

• Detected means instruments measured nitrate at that level, but detection alone does not indicate a water safety issue.
• Median is the middle concentration value among all samples, summarizing typical nitrate presence in the aquifer region.
• Range shows the lowest to highest measurements found, illustrating variability across wells and depths.

None of the 358 results from 16 wells in Bernalillo County's aquifer 112SNTFU exceeded any federal nitrate thresholds during the sampling period. This means the groundwater meets federal standards for nitrate concentration.

If you want to compare Bernalillo County's nitrate record with a neighboring county's, what differences and similarities matter?

Comparing area nitrate levels requires caution since differences in well depths, land use, and sampling frequency affect values. A neighboring county may have more or fewer nitrate detections or different median concentrations, but these differences do not directly translate to your well's water quality. Local factors and well-specific testing remain essential for accurate assessment.

If you obtain a certified laboratory test for your household water, what should you know about interpreting nitrate results?

A certified laboratory report will provide nitrate concentration in mg/L for your specific water source. This precise measurement is necessary to determine if your water requires treatment or if your existing system is functioning properly. Compare the test result against federal nitrate limits and consult options to restore treatment if elevated nitrate is confirmed.

What should you not conclude from the Bernalillo County nitrate data? The local aquifer's nitrate record offers useful context but does not define the nitrate level of your individual well or tap water. Only direct testing of your household water can confirm its nitrate concentration. Detection in regional groundwater does not automatically mean your water is unsafe or exceeds any limits. Understanding this distinction helps prevent assumptions and guides proper water quality management after equipment failure.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2020-01-09. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nitrate in the 112SNTFU aquifer (Bernalillo County): 358 results from 16 wells, median 0.7365 mg/L, range 0.042-8.28 mg/L; none above any federal threshold