Understanding Manganese in Pottawatomie County Water: What Area Sampling Reveals
$1,127.33
Fleck Black Manganese Stains Filter
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
What Area Sampling Can and Cannot Tell You About Your Water
Government testing in Pottawatomie County’s 310WLNG aquifer reveals manganese presence in some wells, but these results represent area-wide data, not individual household water. While useful as a general guide, the only way to know your own water’s manganese content is through direct testing.
1. Evaluating Treatment Capacity Versus Daily Household Demand
Estimating Household Water Use
Typical daily residential water use varies, but knowing your household's consumption helps determine how much manganese-focused filtration is needed. Consider the number of people and water uses like drinking, cooking, and washing.
Matching Filter Capacity to Your Flow
The Fleck Black Manganese Stains Filter ships ready to configure for home systems and can be sized to match your household’s typical water flow and volume, ensuring effective manganese removal without waste.
2. Interpreting the Range of Manganese Levels in Light of Federal Guidance
Range and Median Values from Area Sampling
USGS sampling between August 2011 and May 2013 found manganese detected in 10 of 24 wells, ranging from 0.29 to 310 micrograms per liter (µg/L), with a median of 1.025 µg/L. No results exceeded federal secondary standards related to aesthetics.
What Detection Does and Does Not Indicate
Detection means manganese was present at measurable levels, not that it surpasses safety or regulatory limits. Federal secondary standards for manganese address taste and staining, not health risks.
3. Applying Median and Range Data to Your Household Perspective
Using Median as a Typical Value
The median manganese measurement in area wells (1.025 µg/L) suggests that half the sampled wells had levels below this value, providing one point of reference for what you might expect locally.
Considering the Highest Values
Upper range values detected (up to 310 µg/L) show that manganese concentrations can vary considerably between wells, underscoring the importance of specific testing to understand your home's situation.
4. Comparing Pottawatomie County’s Data with Neighboring Areas Carefully
Regional Differences in Manganese Levels
Nearby counties may have different manganese ranges based on geology and aquifer characteristics. Comparing data helps understand regional tendencies but should not substitute for local water analysis.
Avoiding Overinterpretation
Do not assume your water’s manganese concentration by comparing county-wide results alone. Local conditions and well depth can cause significant variation.
5. Sample Size and Its Role in Data Reliability
Number of Wells and Sampling Dates in This Record
The data set covers 24 wells sampled over nearly two years, with depths ranging from 80 to 320 feet, representing a modest but informative sample of the aquifer.
Implications of Sample Size on Representativeness
A smaller sample size means data reflects broad trends but may not capture all local variability, reinforcing the need for personal water testing.
Summary
This manganese data reflects USGS groundwater sampling in Pottawatomie County’s 310WLNG aquifer between 2011 and 2013, covering 24 distinct wells. While no manganese results exceeded federal secondary standards, this information guides understanding of regional water quality. Individual household water should be tested to determine specific manganese levels. The Fleck Black Manganese Stains Filter ships ready to configure for home use and can address manganese-related staining and taste concerns effectively based on your water’s test results.
Source: U.S. Geological Survey groundwater sampling at https://waterdata.usgs.gov/monitoring-location/350234097040401/
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-05-01. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 310WLNG aquifer (Pottawatomie County): 24 results from 24 wells, median 1.025 ug/L, range 0.29-310.0 ug/L; none above any federal threshold