Five Wells and Limited Data: What the Samples Tell Us and What They Don’t
Government sampling of Pawnee County’s aquifer 322VNSS collected five manganese results from five separate wells during spring 2018, all between 67 and 185 feet deep. These limited data points offer a snapshot of manganese in source water but do not represent every well in the area. A small number of samples means variability between homes can be greater than this dataset shows.
Identifying Manganese Symptoms Versus Other Water Issues
Household water showing brownish or black staining, or a metallic taste, might suggest manganese presence. However, stains can result from other minerals or plumbing factors, and taste can be influenced by multiple constituents. Lack of staining or taste does not rule out manganese either, since concentrations can be low yet still detected. Determining if manganese specifically affects your water requires targeted testing.
Plumbing Materials and Age Affect Manganese’s Appearance Independently of Source Water
The type and condition of household plumbing influence how manganese affects water quality perceived at taps. Older pipes may show more visible deposits or interact with manganese differently than modern materials. Thus, plumbing age and material must be considered separately from manganese levels in the groundwater when assessing household water characteristics.
Well Depth and Water Source Impact What Manganese Levels to Expect
Samples taken between 67 and 185 feet deep in Pawnee County’s aquifer reflect manganese levels at those depths, but shallower or deeper wells can have different profiles. Surface water or other source types might also vary widely. Knowing your well’s depth and source type is essential to anticipate manganese concentrations and treatment needs.
Understanding Certified Laboratory Test Results for Manganese
A certified water test for manganese reports concentration, usually in micrograms per liter (µg/L). In Pawnee County, government samples showed a median of 22.2 µg/L and a range from 0.32 to 58.0 µg/L. No results exceeded federal manganese thresholds. Such tests confirm your own water’s manganese level and establish the basis for treatment decisions.
Comparing Pawnee County’s Manganese Record With Neighbouring Areas Carefully
When reviewing manganese data from surrounding counties, it’s important not to assume uniformity. Each aquifer and sampling effort differs. Pawnee County’s 322VNSS aquifer data is specific and cannot be directly applied elsewhere. Use regional comparisons as contextual background, not as a direct indicator of your household water quality.
In summary, government manganese data for Pawnee County provides limited but useful insight into typical groundwater levels. Confirming your home’s manganese concentration with a certified lab test and considering your plumbing and well specifics are essential next steps. For water treatment, the Autotrol Black Manganese Stains Filter ships ready to configure and is documented to address manganese staining effectively in residential settings.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2018-05-11. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 322VNSS aquifer (Pawnee County): 5 results from 5 wells, median 22.2 ug/L, range 0.32-58.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.