What a Manganese Laboratory Test Report Shows
A laboratory water quality report for manganese typically lists the concentration in micrograms per liter (ug/L) or parts per billion (ppb). For Meeker County groundwater sampled in aquifer 112TILL, five wells produced manganese readings ranging from 112 to 515 ug/L, with a median value of 414 ug/L. All samples recorded manganese detections, none were below detection limits, and importantly, none exceeded the federal health-based thresholds. These figures represent an area-wide snapshot, not a specific well.
How the Fleck Black Manganese Stains Filter Removes Manganese
The Fleck Black Manganese Stains Filter uses advanced filtration technology designed specifically for manganese removal. It operates by filtering water through a media bed that captures manganese particles, preventing them from reaching household plumbing fixtures. The system ships ready to configure and can support households experiencing manganese accumulation that surpasses the capacity of their existing equipment. This filter effectively reduces manganese staining and associated water quality issues typical of regional levels.
How Manganese Enters Groundwater in Meeker County’s 112TILL Aquifer
Manganese naturally occurs in soil and rocks surrounding the Meeker County area. It infiltrates groundwater as water seeps through these geologic materials. The 112TILL aquifer is shallow, with sampled wells between 20 and 114 feet deep, which facilitates contact between water and manganese-bearing deposits. Seasonal variations and local geology impact manganese concentration but this sampling snapshot shows routine detection within a moderate range statewide.
Household Symptoms That May Indicate Manganese Issues
Visible signs consistent with manganese presence include brownish or black stains on fixtures and laundry, along with a metallic taste in water. However, many symptoms often attributed to manganese may also arise from other minerals or plumbing conditions. The presence of such stains or taste does not confirm manganese levels beyond typical regional findings without specific testing. Conversely, clear water and no stains do not guarantee manganese absence in the water supply.
Sampling Scope: How Many Wells and What It Means
The data cited derives from five separate wells sampled over two days in May 2016, forming an area aquifer sample of Meeker County’s 112TILL aquifer. Although limited, this small sample size allows a snapshot of manganese presence in this locale but cannot define the condition of any one household’s water. Variability exists widely between wells, depths, and seasons, so a household water test is necessary for precise knowledge.
Understanding 'Detected', 'Median', and 'Range' in the Sampling Record
'Detected' means the measurement instrument recorded manganese presence at or above its detection limit; all five wells showed detections. 'Median' refers to the middle value of manganese concentrations from the five samples, here 414 ug/L, indicating typical regional levels. The 'Range' from 112 to 515 ug/L shows variability among wells. None of these values represent violations or unsafe levels; they are simply measurements reflecting natural manganese occurrence.
Secondary Aesthetic Standards Versus Health-Based Limits for Manganese
Manganese has secondary standards primarily covering taste, staining, and appearance, distinct from health-based limits. While the manganese concentrations measured do not surpass health-related thresholds, exceeding secondary aesthetic values can cause staining and discoloration issues without posing a known health risk. This difference guides treatment priorities focused on water usability and household maintenance rather than health concerns.
The Essential Step: Ordering a Manganese Test for Your Home
Because regional data cannot specify your household water condition, the crucial next step is to obtain a water test focusing on manganese concentration from your pipe or well. Testing confirms whether manganese levels in your water exceed what your current equipment can handle. A confirmed elevated reading would justify using treatment like the Fleck Black Manganese Stains Filter, which ships ready to configure for residential use to address manganese build-up efficiently.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2016-05-11. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 112TILL aquifer (Meeker County): 5 results from 5 wells, median 414.0 ug/L, range 112.0-515.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.