Reading Your Manganese Laboratory Test Report
The report lists manganese concentration in micrograms per liter (ug/L)
This figure shows the manganese amount detected in your water sample. It does not by itself indicate whether manganese is a health concern or an aesthetic issue.
Reports may note levels as detected or below reporting limits
"Detected" means the instrument found manganese. "Below the reporting limit" means the concentration is too low to measure reliably. Neither status alone identifies your water as problematic.
The Influence of Plumbing Materials and Age on Manganese Presence
Older plumbing materials can accumulate manganese deposits over time
Separately from source water, aged pipes may contribute to visible staining or deposits that resemble manganese effects even if the water itself has low manganese.
Newer plastic or coated pipes typically reduce manganese staining risks
These plumbing options help prevent buildup but do not alter manganese levels entering your home.
Interpreting Measured Manganese Levels Against Federal Guidelines
Sampling in Livingston County’s aquifer 112OTSH shows a range from 0.26 to 2000.0 ug/L
These values represent measured manganese in 11 samples from 9 wells collected between 2010 and 2016. The median concentration was 1.86 ug/L.
No federal threshold for manganese was exceeded in these samples
The detected ranges occur below any federal limit set for manganese. This means manganese was found but not at levels classified as a health violation by government standards.
High manganese concentrations may still cause staining or taste issues
While safety thresholds were not surpassed, aesthetic secondary standards for manganese address staining and taste. Exceeding these does not mean the water is unsafe but can signal a quality concern.
Sample Size and Scope: What 11 Results from 9 Wells Tell Us
Aquifer 112OTSH data comes from wells between 15 and 68 feet deep
This depth range reflects common residential well depths but does not guarantee identical results for every well in the area.
The small sample size means individual well water may differ substantially
11 samples provide an overview of area conditions but cannot establish manganese levels in any single household’s water without individual testing.
Additional Questions for Commercial or Industrial Water Use Compared to Households
Commercial operations often require more frequent manganese monitoring
Larger volumes and specific processes may increase sensitivity to manganese-related issues requiring specialized testing and management.
Industrial users may consider manganese removal capacity more critically
Standard residential concerns like staining and taste may be supplemented by operational thresholds for manganese in manufacturing or processing water.
How a Pentair Black Manganese Stains Filter Addresses Residential Manganese
This filter is designed to reduce manganese causing staining and discoloration
It operates by removing manganese particles that cause visible deposits, improving water clarity and appearance.
The system ships ready to configure for household water treatment needs
It can be selected based on the manganese concentration you measure in your water and the daily demand your home requires.
To decide which treatment class fits your household, test your own well water manganese level through a certified laboratory. Compare those results with the regional data from Livingston County aquifer 112OTSH and consider visible or taste issues. The Pentair Black Manganese Stains Filter offers a documented solution for addressing these manganese concerns effectively at home.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2016-08-15. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 112OTSH aquifer (Livingston County): 11 results from 9 wells, median 1.86 ug/L, range 0.26-2000.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.