Introduction to Hendricks County Aquifer 112PLSC and Groundwater Manganese
Water reaching households in Hendricks County, Indiana, often comes from the aquifer designated 112PLSC. Groundwater from this aquifer is sampled periodically to monitor various constituents, including manganese. The water flows from wells that tap into different depths of the aquifer, typically between 8 and 28 feet deep, before being delivered to residential taps.
1. Why Aesthetic Secondary Standards Differ from Health-Based Limits for Manganese
Manganese in water is regulated primarily by aesthetic secondary standards, which relate to taste, staining, and discoloration rather than safety. These standards are not health-based limits. Federal guidelines set health-based thresholds for manganese that protect against toxicity, but manganese detected below these thresholds is not classified as unsafe. The Hendricks County groundwater sampling record for aquifer 112PLSC shows manganese was detected in 29 of 30 samples but never above any federal health-based limit. This means manganese presence should be viewed mainly through the lens of water appearance and usability rather than health risk.
2. How Sample Depth, Well Depth, or Source Type Affects What You Should Expect
The manganese concentrations recorded come from wells of variable depths, ranging from shallow (8 feet) to deeper wells (28 feet). These differences in depth influence manganese levels because manganese distribution in groundwater may vary with depth and local geology. Shallow wells can sometimes show different manganese levels than deeper wells due to varying oxidation conditions and sediment contact. Since the Hendricks County data aggregates samples across depths, individual well results may differ. To understand your household water, a specific test of your own well water is necessary because area-wide results show trends but do not pinpoint individual water quality.
3. How to Compare This Area’s Manganese Record with Neighboring Counties Without Overreading It
Comparing manganese records across counties can be helpful for context but should be done cautiously. Variations may arise from geology, aquifer characteristics, or sampling methods. Hendricks County’s median manganese concentration is 58.6 micrograms per liter based on 30 samples from 5 wells. Neighboring counties might have different medians or ranges. However, differences do not automatically mean one county poses a higher or lower risk for homeowners. Sampling timing, well depths, and local conditions all factor into the data. Use such comparisons to inform questions for your water test rather than assume it defines your household water quality.
4. How the Documented Treatment Technology Removes or Neutralizes Manganese
When manganese is present at levels causing staining, discoloration, or taste issues, treatment options exist. The Pentair Black Manganese Stains Filter is a documented solution designed to address manganese in residential water. This system works by filtering manganese particles from water, reducing their presence at the tap and minimizing related staining or discoloration. It ships ready to configure and can be used where individual water tests show manganese levels that cause aesthetic problems. The system’s technology focuses on effective manganese removal, supporting cleaner water appearance without requiring chemical additives.
5. What the Measured Range Means Against the Relevant Federal Standard, and What It Does Not Mean
The manganese concentrations measured in Hendricks County’s aquifer 112PLSC range from 0.53 to 69.7 micrograms per liter, with a median of 58.6 micrograms per liter. All results are below the federal health-based standard, demonstrating compliance with safety guidelines. This range indicates manganese is commonly present but at levels not associated with health risks. However, the presence or range of manganese detected does not predict your well’s condition. It also does not indicate water quality issues unless staining, taste, or other aesthetic concerns arise. Testing your household water provides a precise measurement to guide treatment decisions.
Conclusion: Matching Treatment to Your Household’s Manganese Level
If tests on your household water reveal manganese concentrations that affect water appearance or quality, the Pentair Black Manganese Stains Filter offers a ready-to-configure treatment option. It is designed specifically for manganese removal in residential settings and can help mitigate staining and discoloration linked to manganese in water. By understanding this area’s manganese data and testing your own water, you can select a treatment aligned with your household’s needs and maintain desirable water aesthetics.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-08-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 112PLSC aquifer (Hendricks County): 30 results from 5 wells, median 58.6 ug/L, range 0.53-69.7 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.