Lead in Ada County Water: Comparing Median and Distribution Levels for Household Choices
$2,126.00
WSP Whole House Lead Reduction System
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
If you note lead concerns in your tap water, here is how to read the median and range reported for Ada County's public water supply
The public water system serving Ada County, VEOLIA WATER IDAHO (ID4010016), caters to over 260,000 people and uses surface water sources. Government sampling as of June 2026 shows the 90th percentile lead concentration in the distribution system's water at 0.002 mg/L. This figure is a statistical measure describing lead levels in consumer taps across the entire system, not a direct measurement of your well or home's water.
Being the 90th percentile means that 90% of sampled points in the system had lead levels at or below 0.002 mg/L. It does not indicate any individual home’s exact lead content, which can vary based on plumbing materials and household conditions. The system has no EPA health-based violations recorded, signaling compliance with federal lead standards for public water.
If you consider your property’s unique plumbing, understand how public records differ from private well or household water tests
Public water system testing covers the water after it enters the distribution network but before it reaches your tap, except for some sampling directly at consumers’ faucets to detect possible lead leaching from household plumbing. This sampling is broad and statistical rather than site-specific. Your home's water quality can diverge due to factors like lead service lines or interior pipe corrosion.
Only laboratory testing of water taken directly at your home's tap can establish your specific lead concentration. Such testing informs whether your household experiences elevated lead levels beyond the public system’s overall median.
If you decide on treatment, the C-Series Lead in Water Filter offers a targeted method to reduce lead exposure at the point of use
The C-Series System is designed to reduce dissolved lead that may be present in your water post-distribution. It uses certified filtration technologies tailored to intercept and remove lead particles and ions. Shipped ready to configure, this system lets you address lead concerns at a single tap without altering the home's plumbing infrastructure.
This approach is suited for homeowners who want a focused, point-of-use treatment option supported by verified performance against lead in water.
If you want to contextualize Ada County's lead levels, compare them thoughtfully with nearby counties without over-interpreting the data
Lead measurements vary by system due to source water differences, treatment processes, and distribution infrastructure. Ada County’s 90th percentile lead measure of 0.002 mg/L is well within typical ranges observed in similar urban systems using surface water sources and modern treatment codes. Comparison with neighboring counties should focus on similar sampling dates, population served, and water source types to avoid misleading conclusions.
If you see "detected", "median", or "range" in your water quality report, here is what those terms mean for Ada County lead data
"Detected" means that lead was measurable at some sample points but does not itself indicate unsafe levels or violations. The "median" is the middle value of sampled concentrations, while the "90th percentile" indicates a higher-end concentration that 90% of samples fall below. "Range" shows the span from the lowest to the highest measured lead levels.
In Ada County's system, the 90th percentile lead falling at 0.002 mg/L means lead is measurable but well-controlled within federal standards. Such figures describe the distribution system and are not a direct reading of your home’s water.
If you prepare to consult experts or consider treatment, write down these facts from your system’s record and your household’s conditions
- The water system name and ID: VEOLIA WATER IDAHO (ID4010016)
- Sample date: June 30, 2026
- Reported 90th percentile lead level: 0.002 mg/L
- Presence of surface water as source
- Any known interior plumbing or service line material information from your property
- Results from any private tap water testing you have conducted
Having this information ready helps clarify your situation when discussing options or seeking recommendations.
To settle questions about your specific home's lead level, the essential step is to order a laboratory test of your water sampled directly at your tap
This test accurately measures lead concentration in your household water, reflecting any plumbing influences or service line conditions unique to your location. The result determines whether point-of-use filtration like the C-Series Lead in Water Filter is warranted to mitigate exposure.
Such targeted testing is the definitive way to make informed decisions about managing lead concerns in your home water supply.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2026-06-30. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA SDWIS record for VEOLIA WATER IDAHO (ID4010016), surface water supply, serving 264978 people: 0 health-based violations of 62 total; lead 90th percentile 0.002 mg/L