Government sampling in Livingston County's aquifer 112OTSH shows iron presence in groundwater wells, with levels detected in most samples but no federal health thresholds exceeded. This data helps residents consider iron and rust treatment options for their household water.
Interpreting 'Detected,' 'Median,' and 'Range' in Livingston County’s Iron Sampling
In the USGS groundwater samples from nine wells in this area, iron was detected in 8 out of 11 measurements. The median iron concentration found was 13.4 micrograms per liter (ug/L), with individual results ranging widely from 4.6 to 18,600 ug/L. "Detected" indicates the instrument measured iron at or above the reporting limit, but does not imply any health risk or water quality violation. The median offers a typical middle point, while the range shows variability across wells and times.
Impact of Sample and Well Depth on Expected Iron Levels
The sampled wells ranged from 15 to 68 feet deep, which influences iron findings. Shallower or deeper wells may yield different iron amounts due to geological layers and water flow. Because this record covers multiple well depths, individual household wells may experience variations outside the sampled range, necessitating personal water testing.
Significance of the Number of Samples and Wells for Local Water Quality Insights
Eleven samples from nine separate wells provide a snapshot but a limited dataset for the region’s aquifer. This relatively small sample size means the record shows a useful general pattern for Livingston County but cannot precisely predict iron levels in any single well. Local factors and well construction also affect water quality.
Matching Treatment Capacity with Household Water Use Needs
When selecting iron and rust water treatment, households should consider daily water volume and peak usage. Treatment systems designed to handle typical domestic flow rates ensure effective iron removal without waste or overload. Estimating household consumption helps choose a treatment solution with appropriate capacity for consistent performance.
How the Fleck Orange Iron & Rust Stains Filter Addresses Iron Removal
The Fleck system reduces iron concentrations and the associated rust staining by filtering iron solids and transforming dissolved iron forms. Its design targets iron that causes water discoloration and deposits on fixtures, improving water clarity and appearance. This treatment technology ships ready to configure for residential water systems without requiring special setup.
Fixtures and Appliances Most Affected by Iron and Rust Deposits
Iron and rust typically first impact faucets, sinks, and laundry appliances where water exposure is frequent and visible. Stains may develop on porcelain surfaces, and iron deposits can reduce appliance efficiency over time. Addressing iron with proper treatment helps protect plumbing fixtures and household equipment from aesthetic and functional effects.
This overview is based on groundwater samples collected in Livingston County’s aquifer 112OTSH from 2010 to 2016 by the US Geological Survey. For detailed data and updates, consult the official source at the USGS water data website.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2016-08-15. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112OTSH aquifer (Livingston County): 11 results from 9 wells, median 13.4 ug/L, range 4.6-18600.0 ug/L; none above any federal threshold