If You Know the Sampling Base Behind Bartholomew County’s Iron Data
The U.S. Geological Survey sampled groundwater in Bartholomew County's aquifer 112PLSC from May to November 2023. This data comes from two separate wells, each between 49 and 111 feet deep, yielding eight total iron measurements. The samples reflect general conditions in the aquifer but do not represent any single well or household specifically. Understanding the limited sample size is crucial; it shows patterns but cannot predict exact iron levels in your own water.
If You Want to Interpret Median and Range for Iron in Your Water
The median iron level in these samples was 2915 micrograms per liter (ug/L), with recorded values ranging from 434 to 4870 ug/L. This range captures the variation across sampled wells and times but does not indicate a violation of federal thresholds, as no sample exceeded any regulatory limit. As a homeowner, this means iron presence is common but varies widely. Your water may fall anywhere within or outside this range, so a personal water test is necessary to know your own condition.
If Iron and Rust Problems Are Left Untreated Over Years
Accumulated iron in your water can cause visible rust staining on fixtures, laundry, and surfaces. Over time, it may also lead to clogging in pipes or appliances and affect water clarity and taste. Although iron levels here have not triggered health-based concerns, prolonged untreated iron can increase maintenance needs for household plumbing. Addressing these problems promptly helps preserve water quality and household infrastructure.
If You Wonder What 'Detected,' 'Median,' and 'Range' Mean in This Record
'Detected' means the iron was measurable in all samples; none were below reporting limits, confirming iron's consistent presence in the aquifer. 'Median' is the middle value, representing a typical concentration among the samples. 'Range' shows the lowest and highest measurements recorded. These terms describe statistical patterns in Bartholomew County’s aquifer, not individual well results or safety status.
If You Consider the Maintenance Routine When Using the Autotrol Orange Iron & Rust Stains Filter
This system ships ready to configure for household water treatment. It operates by reducing iron and rust stains, helping to improve water appearance and quality. Maintenance involves replacing or regenerating filter media according to usage, typically on a schedule informed by water iron levels and household demand. Following this rhythm ensures continued treatment performance without surprise interruptions.
If You Need to Evaluate Treatment Capacity Against Household Water Use
Water treatment systems must match your household’s daily water consumption. Estimating average usage considering family size, fixtures, and appliances helps determine filter capability needs. The Autotrol Orange Iron & Rust Stains Filter is designed to handle various residential demands, but selecting appropriate capacity requires knowing your water volume to ensure effective iron and rust reduction without overburdening the system.
These findings and explanations reflect government groundwater sampling results for Bartholomew County’s aquifer 112PLSC only. For detailed data, visit the U.S. Geological Survey monitoring location 391035085560401.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2023-11-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112PLSC aquifer (Bartholomew County): 8 results from 2 wells, median 2915.0 ug/L, range 434.0-4870.0 ug/L; none above any federal threshold